Get The App From Play Store!

Skip to main content

Dishwasher Lower Spray Arm Nozzle Stock Number: ES501335

Genuine part for select AEG, Electrolux, Tricity Bendix and Zanussi dishwashers

Read more

Manufactured by Tricity Bendix

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Dishwasher Lower Spray Arm Nozzle

If you have a crack in your lower spray arm nozzle, it will reduce the water pressure power that's pushed out, leaving your lower basket dishes still pretty dirty. So, time to replace it with this genuine replacement spare part.

This is a genuine spare part suitable for select models of AEG, Electrolux, Tricity Bendix and Zanussi dishwashers.

Please check the list of suitable models to ensure that this is the correct part for your appliance.

PLEASE NOTE: The spray arm nozzle and expanding band are now supplied as a single piece, please follow these instructions to fit this part:

1) The single piece will need to be cut into the 2 separate parts using a craft/Stanley knife as shown (A diagram is included with the part).

2) Where necessary trim down the expanding band so the spray arm nozzle can fit properly.

3) Lay the spray arm on a flat surface and insert the expanding band into the spray arm.

4) Insert the spray arm nozzle into the expanding band until it clips in.

 

Ask a Question

2 Questions and 2 Answers

nozzle and collar seem to be a single moulding. How much force can I use to separate them? Would it help to make it more brittle by freezing?

By kitchenslave - Sutherland - 13 February 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Kitchenslave, I wouldn't recommend freezing the nozzle. If you just 'shimmy' it for a while it should eventually separate.

Answer this question

I require two of this part if it will fit a BDW 52 if not can you please tell me if tou can supply the parts I require and at what cost. Thank you, Bob X

By Bobski - Hampshire - 23 November 2008
  • Samara from eSpares
    Samara at eSpares says...

    Hi Bobski, For the BDQ 52 model the correct lower spray arm nozzle can be found here: http://www.espares.co.uk/part/dishwashers/zanussi/p/1083/332/0/0/501334/dishwasher-lower-spray-ar.html If you also need a central nozzle the right one for your machine can be found here: http://www.espares.co.uk/part/dishwashers/electrolux/p/1083/15/0/0/501333/central-nozzle.html

Answer this question

Will this part fit my appliance?

Check Now

Dishwasher Lower Spray Arm Nozzle

£33.28
(inc. VAT)
£33.28