Brown Main Oven Outer Door Glass Stock Number: ES491214
Genuine spare part for select models of Creda cookers
Manufactured by Creda
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Brown Main Oven Outer Door Glass
Do you need to replace the outer glass on your main oven door? A cracked door glass will become weaker over time, and potentially get worse. If you have damaged or smashed the main oven outer door then eSpares are here to help. Using this replacement door you can get your cooker looking and working like brand new again!
This is a genuine spare part and will fit select models of Creda cookers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
Creda spares reference: 6101649 / C00224571
3 Questions and 2 Answers
Firstly, is this glass for the TOP oven please? Secondly, does the glass come complete with locating brackets ? When the glass broke I saw that these were glued on so they would be needed when fitting the new outer glass to the door. Hope very much that you can help. Many thanks
-
Rory at eSpares says...
Hi there, this is a door glass for the main oven (i.e. not the grill oven). The door doesn't come with any separate parts, but does come with three silver brackets glued to the back. Hope this helps.
creda r365 reflection hob/oven
-
Anonymous at eSpares says...
Hi Markgalbraith The door glass you're looking for can be found here: http://www.espares.co.uk/part/cookers-and-hobs/creda/r365er/p/1092/720/0/422107/867267/main-oven-inner-door-glas.html If you have any problems fitting it, we recommend you contact your local Creda or cooker specialist (or ask a friend or relative!). It should, however, be a simple enough 'take-out-and-replace' task.
Having smashed the glass when it dropped out when removing for cleaning(!), I am left with the top handle which is attached by four screws and can be refitted to a new glass. The bottom of the glass had two brackets with ears that fitted into the rubber grommets in the inner door frame. The image of the new door shows two plates glued to the bottom of the glass but there are holes in the upturned part of the bracket where I would expect there to be a pin each side. Could you please advise on fitting. Many thanks
Will this part fit my appliance?
Check Now
