Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Electrolux Washing Machine Door Interlock for EWF1647 Stock Number: ES488164

Electrolux Washing Machine Door Interlock for EWF1647 - ES488164
View video

4.8 out of 5 Rated 4.8 out of 5 (91 customers)

Genuine spare part for select AEG, De Dietrich, John Lewis Kuppersbusch and Zanussi washing machines

Read more

Manufactured by Electrolux

Will this part fit my Appliance?

Yes

This part is compatible with Electrolux EWF1647 Washing Machines.

Important: 91451782100, 91451782102, 91451780100

Not what you're looking for?
See all parts for your appliance.

Washing Machine Door Interlock

The door interlock is an electronic device that is designed to give a time delay of approximately 2 minutes before the door of a washing machine can be opened once the wash/drying cycle has completed. Door locks should be checked regularly to ensure that they are working correctly.  During the cycle the door should remain locked; as it is can be extremely dangerous if this is not the case.

The common fault when a door interlock fails is that the washing machine will not start.  There will be power to the washing machine, which is usually shown if the light is present and lit up on the front fascia panel.  However, when the door is closed and the wash/drying cycle is selected and started the machine will appear 'dead'.

Specification:

  • 4 Tag

Genuine spare part for select AEG, De Dietrich, John Lewis Kuppersbusch and Zanussi washing machines.

Please note: This part is PNC number dependent. An example PNC number is 91460200000. Please contact our Call Centre with your washing machine's PNC number to make sure you get the correct part for your appliance.

Please check the model fit list to ensure compatibility with your appliance.

Here’s what other people are saying about Electrolux Washing Machine Door Interlock for EWF1647.

(91 reviews)

4.8 out of 5

Ease of fitting 5 out of 5
Quality 5 out of 5
Value 4 out of 5
  • UK
    5.0 out of 5

    Very helpful eSpares video.

    Yet again - eSpares come to rescue! Quality part, swift delivery/reasonable 'next day' charge - and very good video.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • east midlands
    5.0 out of 5

    Easy fit

    My pretty old washer survives again. Genuine part easy to fit, and youtube to show you how. Espares did it again.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • Hoylake, Wirral.
    5.0 out of 5

    Exact part, delivered very quickly

    Thank you for delivering the exact part so quickly - the washing machine was only out of action for one night! Excellent service.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

7 Questions and 6 Answers

When I close the door and set the programme, the door lock light flashes and clicks repeatedly. The door lock light will not stay solid even though the door is firmly closed so the machine will not start filling. Would this be a door interlock problem or the PCB Board, please?

By Gillian - - 28 May 2018
  • Dean from eSpares
    Dean at eSpares says...

    We believe it is likely to be the door lock, so check that first before suspecting anything else.

Answer this question

I Bought the door handle kit DST405508551 fitted... door still didn't close so thought it must be the door lock interlock system bought this and fitted. Still didn't close. Took everything off put back to old stuff. Holding lock in the machine until the door interlock clicks and the door stays shut and the machine runs no error codes. Any idea what is wrong????

By WMRugbyRef - Essex UK - 08 April 2018
  • Dean from eSpares
    Dean at eSpares says...

    Check the door has not dropped otherwise the door catch won't connect into the door lock correctly causing it not to lock.

Answer this question

E40 FAULT 1 Answer

zanussi zwh6105 fault code E40 door lock would this also cause the machine not to spin or empty the water

By derek - livingston - 21 July 2017
  • Dean from eSpares
    Dean at eSpares says...

    If the door lock is not activating the washing machine will not start so it will do nothing.

Answer this question

The AEG Lavamat 72640 is showing an E40 error, I have checked the manual for the E40 error and done the following (replaced main fuse, check door is closed firmly, checked drain tap at the front bottom right). But the washing machine is still showing an E40 error and won't allow for the wash to start, it turns on but won't start on any wash cycle.

By Robin - England - 24 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    E40 is a door lock error and may need replacing, for more information see our video: http://www.espares.co.uk/advice/7/2498

Answer this question

The interlock clicks like it always has when I start the machine, then beeps and says E40. Is there a way to tell if the interlock is the problem and needs replacing? Its a John Lewis JLWM1407

By Jon - - 06 January 2016
  • Chris from eSpares
    Chris at eSpares says...

    It is likely a new lock will resolve the problem.

Answer this question
See all questions and answers
Order within 12AM for UK Next Day Delivery