Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Hotpoint Washing Machine Bearing And Seal Kit - 35mm Stock Number: ES487850

4.8 out of 5 4.8 out of 5 (145 Reviews)

Hotpoint Washing Machine Bearing And Seal Kit - 35mm - ES487850
View video

4.8 out of 5 4.8 out of 5 (145 Reviews)

Genuine spare part suitable for select models of Hotpoint, Indesit, Ariston and Creda washing machines

Read more

Manufactured by Indesit

(This part fits select Hotpoint models)

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Washing Machine Bearing And Seal Kit - 35mm

If you can hear the bearings grind during the wash cycle, or if the drum in your washing machine is making crunching noises, it could be due to faulty bearings. eSpares could soon help you out with this problem. You could soon be back to a fully working washing machine and wash your clothes with confidence. 

Specification:

  • Size: 6206Z & 6207RS
  • Size: 35mm
  • Seal assembly

Important: The bearings included within this kit are suitable for 35mm shafts only.

Genuine spare part suitable for select models of Hotpoint, Indesit, Ariston and Creda washing machines. 

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Write a review

Here’s what other people are saying about Hotpoint Washing Machine Bearing And Seal Kit - 35mm.

(145 reviews)

4.8 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 5 out of 5
  • North West
    5.0 out of 5

    Just what required

    With tutorial and tips from others, found able to repair, slowly but it worked thank you

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Manchester
    5.0 out of 5

    Bearings

    After fitting a new belt the correct tension then showed that the bearings were shot, hard work but very rewarding on completion, washing machine is now like new.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Guernsey
    5.0 out of 5

    Bearing swap, hard but worthwhile

    I bought a new set of bearings and a new drum seal. Then I watched the video. Its a great video, though I laughed at the bit where the drum just dropped out when the bolt was undone and then the bearings taped out and back in again in a couple of minutes.. Pure gold. That said the video really is very helpful and the espares parts fit and work. As a result my trusty old washer is back to its old quiet self. As a regular customer of espares, its great to be able to get the parts. I rated ease of fitting as only 3. Thats no reflection on espares, its just not easy if your machine is old and water has got into the bearings. I offer a few comments that may be useful for others treading the path. 1. If you are thinking of changing bearings, do it sooner. Don't delay. The longer you delay, the more corrosion and the harder it gets. 2. When the drum doesn't fall nicely out of the bearing, be careful. If you have to hit the shaft make sure you don't do it directly, ideally a block of hard wood or if really necessary a bit of mild steel. Be careful you dont deform or compress the screwthread in the shaft. Penetrating/easing oil can help but bear in mind its probably the front bearing thats stuck to the shaft. 3. Once the drum is out, the bearings will come out, honest. But it might need more than a gentle tap. Be patient, again penetrating/easing oil may help. Make sure you keep the bearing straight. Don't loose your rag. It will come out eventually. 4. Clean everything very carefully. Get rid of all the corrosion on and around the bearing seats. 5. The best thing to push a bearing in with is the old outer part of the removed bearing. Split the old bearing, remove the centre and balls, clean up the outer and hammer on that. Make sure the bearing goes in straight. You can be confident you won't slip and damage the new bearing. 6. Check the drum shaft for corrosion especially where the seal will run. Clean it up. If water gets through into the bearings they won't last, and you will be back here again before you know it. 7. If your tub has screws all the way round and not tabs you probably won't need the silicon especially if you fit a new seal. Mine is working fine without. Espares; you are missing a trick. You should sell targeted tools like a bearing puller that fits washing machines bearings! Make it easy.

    Ease of fitting 3.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

44 Questions and 42 Answers

By DJT - essex - 09 September 2018
  • Parminder from eSpares
    Parminder at eSpares says...

    Unfortunately, we have not been provided with the dimensions by the manufacturer. Without the model number, we cannot guarantee that the part ordered will be the correct one for your appliance. For help in finding your model number please visit: www.espares.co.uk/findingmodelnumbers

Answer this question

I have tried the method of trying to shock the shaft free with a hammer and block of wood but it will not release. Do you have any suggestions?

By Karl - Swansea - 26 October 2017
  • Chris from eSpares
    Chris at eSpares says...

    Try placing a block of wood on a solid floor and dropping the drum and rear half of the tub directly on to the wood shaft end first. The weight of the rear tub will usually shock the shaft loose.

Answer this question
By Carol Brewer - yeovil - 05 March 2017
  • Chris from eSpares
    Chris at eSpares says...

    This is shown in the video on the part. It fits on the inside of the tub to stop water reaching the bearings from the shaft of the drum.

Answer this question

Hi can you confirm the bearing kit includes the new seal for the plastic case? Also do you recommend replacing the spider while the thing is in bits or is it not necessary? Thanks

By Simon Jones - Cardiff - 20 December 2016
  • Chris from eSpares
    Chris at eSpares says...

    This kit contains the two bearings and the shaft seal shown in the images.

Answer this question

Hi could you advise which size of bearings fits the above washing machine. Thanks Gillian

By Gillian - Glasgow - 16 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    The drum on your machine is not repairable as it is welded together and cannot be parted and re sealed after bearing replacement. It is likely to be cheaper to have a fixed price repair with Repaircare than replace the drum unit Stock Number: ES1634552

Answer this question
See all questions and answers