Over 4 million customers served
Part assist UK call centre
Dishwasher Detergent Dispenser Assembly Stock Number: ES481643
Genuine spare part for select Bosch, Neff, Siemens and many other brands of dishwashers
Manufactured by Bosch
(This part fits select models)
Will this part fit my Appliance?
Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number? Here's how
Dishwasher Detergent Dispenser Assembly
If you are finding that the detergent is not being dispensed into your dishwasher, as usual, it could be due to a faulty dispenser. Help ensure that your dishes and cutlery continue to come out as clean as possible, by having a fully working dispenser. This replacement from eSpares could be just what you need to get back to a fully working dishwasher again - and back to sparkling dishes!
Specifications:
- Includes: Optical/reed switch rinse aid sensors
Detergent Dispenser fitting tip:
- Unplug from mains
- Remove stainless steel cover with Torx screw driver, leave the two larger screws each side that hold the hinges in place.
- There is a cable tidy which is attached to the inside of the dispenser - remove carefully
- Unplug the connectors to the old dispenser then carefully cut the top plastic lugs off the old dispenser and it will come away easily. Beware the stainless steel edges are sharp.
- Replacement is a reversal of the removal. Press the new dispenser in firmly as it must 'click' into place to be secured by the stainless steel lugs.
This tip was left by Kassy from Essex.
Genuine spare part for select Bosch, Neff, Siemens and many other brands of dishwashers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance, using the ENR number.
-
-
Bath
-
Selkirk
Ask a Question
13 Questions and 13 Answers
As per the other question on this page and your advise I've removed the upper tray and popped it on a short wash. I listened for the solenoid but didn't hear anything within the first few minutes. The wash continued and the drawer was still closed. What are the next steps, I see that the controller is discontinued?
-
eSpares Staff at eSpares says...
If the solenoid is not working then test it with a multimeter but it is likely to be the board if it is not supplying the valve.
i have connected the large one at the bottom obvious place and the small one to the side of it.it only fits on that connection my old one has a connection on the side the new small connection will only fit on the bottom one so this seemed correct alas the dispenser does still not work .many thanks mr sell
-
Chris at eSpares says...
This is a replacement for part Stock Number: ES760356 as the original is discontinued and the replacement will work. If the machine does not 'buzz' to dispense the problem may be the control board.
-
Chris at eSpares says...
Check the connectors from the dispenser have continuity to the circuit board (Low resistance). If this is correct it would suggest a control board problem.
-
Chris at eSpares says...
We believe the part is likely to fit as there are around 9000 models listed and this is a Bosch part.
-
Chris at eSpares says...
Unlike conditioner in a washing machine rinse aid does not change the smell of the load. to avoid smells ensure to rinse all food particles of the plates if not washing immediately. Also try our machine cleaner (see our video: http://www.youtube.com/watch?v=ifWK9df1qgg )
Will this part fit my appliance?
Check Now
Up and running! 19 November 2020
After ordering the wrong part to begin with very pleased with result. Not easy to fit but video helpful.