Washing Machine Drum Bearing Kit Stock Number: ES479424
High quality spare part for select models of Bosch, Neff and Siemens washing machines
Will this part fit my Appliance?
Check this part fits your appliance
High Quality Replacement Washing Machine Drum Bearing Kit
If the drum in your washing machine is making a loud rattling noise then it’s likely that the drum bearings have worn out or become loose. The bearings support the drum in spinning smoothly during every wash cycle. With this replacement bearing kit from eSpares, you could soon have an effortlessly working washer again.
This kit includes:
- 1x Front bearing
- 1x Oil seal
- 1x Rear bearing
Compatible spare part for select models of Bosch, Neff and Siemens washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
4 Questions and 4 Answers
It is a sealed metal tub. The front and top panels can come off, with a back access panel. The spider can be seen through the back panel- it is on the outside of the tub. The drive wheel is on top of this, but doesn't seem to come off. Any advice?
-
Chris at eSpares says...
The bearing spider Stock Number: ES1636094 can be removed from the back of the tub and replaced without dismantling the tub.
-
Chris at eSpares says...
The drum on your model is welded (Stock Number: ES871622) and cannot be dismantled to replace the bearings.
Hi Could you point me in the right direction for replacement bearings for this model please. My model isn't listed. Thanks
-
Chris at eSpares says...
Your model number is not complete (/XX) In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Bosch WFF1201
- Not as difficult as some......remove the top and back casings. Loosen the motor bracket. Remove the drive belt. Undo the bolts holding the spider to the drum. Ease the spider out (it takes time & patience.......) then punch out the bearings, carefully - check a couple of the espares videos on how best to do this, they are very thorough. Fit your new bearings (again - the espares videos are very good on this). Refit the spider/drive belt/motor bolt/etc. The REALLY good news is that you do not need to remove the drum from the machine - the two bearings are both within the spider. Good Luck!
Will this part fit my appliance?
Check Now
