Get The App From Play Store!

Skip to main content
  • Over 4 million customers served

    Part assist UK call centre

  • Over 258,000 Reviews!

    Rated 4.6/5

  • 9.8 million parts delivered

    Next day delivery until 9:00PM

Miele Washing Machine Rubber Door Seal Stock Number: ES187244

5.0 out of 5 5.0 out of 5 (8 Reviews)

Miele Washing Machine Rubber Door Seal - ES187244
View video

5.0 out of 5 5.0 out of 5 (8 Reviews)

Genuine spare part for select Miele washing machines

Read more

Manufactured by Miele

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Washing Machine Rubber Door Seal

If your gasket has developed mould and is leaking water from the door, it could be a faulty seal. eSpares could soon help you solve this problem and prevent further accidents. With this replacement we could give you the reassurance that when you put your washer on, you will not end up with a flooded floor.

This replacement washing machine door seal is a genuine spare part for select models from Miele.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Write a review

Here’s what other people are saying about Miele Washing Machine Rubber Door Seal.

(8 reviews)

5.0 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 4 out of 5
  • North Tyneside
    5.0 out of 5

    REPLACEMENT DOOR SEAL MIELE W844

    Bought to replace leaking seal on our 19 year old machine. Nuisance relatively small leak on full load wash. Could find no leaks on test with empty drum. No tears or splits found just a tired and probably worn seal. Thanks to those previous reviews I managed this changeout with relative ease having a hands on engineering background. I would add the following. On this model I had to pull the machine out about 6 inches to gain access to two screws securing the top cover. Remove the screws beneath plastic covers and slide top cover back. The top was preventing the front opening. Remove three Torx screws size T20 required. Remove three bolts, 10mm socket or spanner. Release the wire clamp. 8mm socket and extension required. Remove the old door seal and clean the soap any any crud’s from the seal mounting surfaces. Replace the seal. I dipped and covered mine in soapy water as a lubricant to aid installation. Assemble wire clip, front cover and top cover. Tested successfully on a full load.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Hamsphire
    5.0 out of 5

    Miele making life easy after 20 years

    Cheap "nock off" versions are available but as the original has lasted 19 years I figured it was worth the extra. Drain filter, remove soap drawer, undo 3 screws (behind soap drawer), and 3 bolts in front, release a clip at the base and swing open whole front of machine. Undo clamp screw while watching through convenient opening. Pull off old filter,. I cleaned off some old rubber from the old seal that had adhered to the drum with a "scrubby" and slipped on new seal. Reverse everything, ... Total time 30 minutes and didn't even have to lay down of floor or lift or tip machine or even pull it out of its position. Basically the machine is so well made it looks like new after nearly 20 years.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • East Lothian
    5.0 out of 5

    Good but expensive

    A friend was fitting this rather than me because the YouTube videos etc suggested it was a bit trickier than most and he used to do washing machines. I bought the Miele product, rather than the very much cheaper option - thought it would be unfair to make the job potentially more difficult. It was OK to fit, but more of a fiddle than most. nb The item was a close fit in a thin cardboard box, well sealed with tape. Fine - except if I had cut the tape with a Stanley knife and been too vigorous I would have damaged the seal.

    Ease of fitting 3.0 out of 5
    Quality 5.0 out of 5
    Value 2.0 out of 5
See all reviews
Ask a Question

4 Questions and 4 Answers

By Anonymous - - 07 August 2009
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    Unfortunately this isn't the right part for you and we don't appear to stock one for this model either... apologies and good luck with the hunt.

Answer this question
By Cotswold - - 05 May 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Cotswold, I'm afraid we don't stock seals for the WS5427, sorry.

Answer this question
By paddockend - YORK - 30 January 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Paddockend, I'm afraid this doesn't come with instructions. However, you might find this page helps you out: http://www.espares.co.uk/guides/washing-machines/g/12/38/replacing-door-seals.html

Answer this question

Washing Machine Rubber Door Seal

By Europhile - - 25 January 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Europhile, I'm afraid this seal will not fit your W808. Sorry!

Answer this question

Will this part fit my appliance?

Check Now

Washing Machine Rubber Door Seal

£112.48
£112.48