Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

White Knight (Crosslee) Tumble Dryer Motor Carbon Brush for CL797R-031279715002 Stock Number: ES185632

5.0 out of 5 5.0 out of 5 (5 Reviews)

White Knight (Crosslee) Tumble Dryer Motor Carbon Brush for CL797R-031279715002 - ES185632

5.0 out of 5 5.0 out of 5 (5 Reviews)

Genuine spare part for select models of White Knight (Crosslee) and Kenwood tumble dryers

Read more

Manufactured by Kenwood

(This part fits select White Knight (Crosslee) models)

Will this part fit my Appliance?

Yes

This part is compatible with White Knight (Crosslee) CL797R-031279715002 Tumble Dryers.

Not what you're looking for?
See all parts for your appliance.

Tumble Dryer Motor Carbon Brush

Carbon brushes are designed to wear down over time as they are in constant contact with moving parts. When this brush does wear down it can cause a build up of static electricity in the drum. With the help of eSpares and this replacement motor carbon brush fitted to your dryer, you'll be back on track in no time. 

Genuine spare part for select models of White Knight (Crosslee) and Kenwood tumble dryers.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Write a review

Here’s what other people are saying about White Knight (Crosslee) Tumble Dryer Motor Carbon Brush for CL797R-031279715002.

(5 reviews)

5.0 out of 5

Ease of fitting 5 out of 5
Quality 5 out of 5
Value 5 out of 5
  • Staffordshire
    5.0 out of 5

    Thank goodness for Google!

    White Knight CL847 Tumble Dryer. Kept stopping after about a minute. This fixed it !!! Very easy to fit from the top, with a single screwdriver. Glad I Googled the model + symptom.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • somewhere in the south west
    5.0 out of 5

    Easy To Fit

    I brought this item as my white knight tumble dryer was not heating properly. This brush sits on top of the drum to make a circuit with the sensor bars fitted in the drum. It is very easy to fit, all done within 10 minutes. A very fast delivery from Espares enabled me to be up and running very quickly without having to buy a near tumble dryer.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Morecambe
    5.0 out of 5

    Easily replaced in about 10 minutes

    Easily replaced to enable drum sensors to connect to electronic circuit board. Unplug dryer and remove lid, brush located at top (if badly worn like mine only the spring remains) easily replaced. I wonder how many dryers and washers have been scrapped due simply to worn brushes.

    Quality 5.0 out of 5
    Value 5.0 out of 5
    Ease of fitting 5.0 out of 5
See all reviews
Ask a Question

2 Questions and 2 Answers

Heating element & 2 x stats continuity all checked/good but still no heat when machine on & otherwise working. Approx. 50% or more carbon brush wear noted though with 8mm. of brush remaining to spring insert. Could a lack of sufficient contact to the drum strip be causing this "no heat" problem on my White Knight CL847 sensor model...as would appear to be the case upon brush replacement/renewal in one of your reviews published on this item ? Kind regards....Richard.

By R.T. - South Wales...UK. - 11 January 2020
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    if the carbon brush is no longer making contact then it would normally cause the drum to stop rotating but can stop the heater if the electronics detect a problem, make sure by testing the heater to check it it working ok.

Answer this question
By monkswife - - 25 April 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Monkswife, I'm afraid this brush will only fit selected tumble dryers. Unfortunately we don't stock parts for drills, sorry.

Answer this question
Order within 05:06:11 for UK Next Day Delivery