Washing Machine Control PCB Module Stock Number: ES1660198
Genuine spare part for select models of Candy, Hoover and Otsein washing machines
Manufactured by Candy
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Control Panel Electronic Module
If the electronic control module in your washing machine causing you problems, then this original replacement part from eSpares could be just what you are looking for.
The printed circuit board is the brains behind your washer, controlling the electronic functions. With help from eSpares and this replacement module, you can soon be back to fully working washing machine - so you can tackle the laundry again in no time!
Genuine spare part for select models of Candy, Hoover and Otsein washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
5 Questions and 5 Answers
I have been getting error codes up to do withthe drain (I have cleaned this - no debris to clear) It ran fine yesterday, but will not run now. Thanks.
-
eSpares Staff at eSpares says...
You will need to test the drain pump with a multimeter and we have a video to help ww.youtube.com/watch?v=frEJhX9Sppw&t just copy and paste into your browser.
Hi do the control boards come already programmed. E.g plug in and works out the box. regards steve 1 Answer
-
eSpares Staff at eSpares says...
This item which is the display board does not require programming, the main board can be supplied as both.
Dyn8164d/l1-80 works ok on some washes but if used on cotton comes up with e16 code and often has e03 code and drain is empty could this be a pcb fault 1 Answer
-
Chris at eSpares says...
E16 is usually caused by a failing heater and can cause other 'random' errors so we would suggest start by replacing the heater.
DYN8163D8X/1-8O works down to 6 minutes then stops and lights flash123and 5 works again on restart down to 1minute then on reset goes bacb to 6 minutes. 1 Answer
is this the PCB
-
Chris at eSpares says...
Try empty as this may be an unbalanced load. For more information to diagnose your problem see our video: How to Understand Hoover and Candy Washing Machine Error Codes: www.espares.co.uk/advice/7/2531
Our hoover DYN8144D1X/1-80 keeps coming up with error code E03 and E16. It seems to be a common problem. It drains OK and heats water OK. Is it likely to be circuit board. It is only 2 years old and had light use. 1 Answer
-
Chris at eSpares says...
A failing heater element can cause these errors so we would suggest you replace this as it is likely to resolve the problem.
Will this part fit my appliance?
Check Now
