Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Cut To Size Universal Fridge Plexiglass Shelf Stock Number: ES1562230

Cut To Size Universal Fridge Plexiglass Shelf - ES1562230

4.2 out of 5 Rated 4.2 out of 5 (193 customers)

Compatible cut to size plexiglass shelf suitable for most fridge freezers

Read more

Will this part fit my Appliance?

This product is compatible with:

  • Fridges & Freezers - Please Check The Dimensions In The Description

Cut To Size Universal Fridge Plexiglass Shelf

This universal spare is made out of plexiglass - so you can cut it to size yourself. If your current shelf has shattered or cracked, it is best to have it replaced, because it will be unsafe to use and store your items on - and over time it will only become weaker.

It's important to take note of the size (shown in the specification area below), as this will help determine whether this particular shelf is suitable for your fridge.


  • Size: 550mm x 480mm x 5mm
  • Cut To Size

Cutting Suggestions:

To cut this glass, use a fine tooth saw like a tenon saw or hacksaw. It can be brittle so go slow and do a trial cut on the 'waste' area. To remove the sharp edges use a file or sandpaper to smooth out the edges.

Compatible spare part suitable for most refrigerators.

PLEASE NOTE: Prior to the purchase of this item please check the dimensions to make sure this is the same size or slightly larger than your original shelf as it can be cut down. 

Write a review

Here’s what other people are saying about Cut To Size Universal Fridge Plexiglass Shelf.

(193 reviews)

4.2 out of 5

Ease of fitting 3 out of 5
Quality 3 out of 5
Value 3 out of 5
  • Surrey
    5.0 out of 5

    Great replacement

    Very pleased with shelf was easy to cut and fit. Was thicker than the original shelf.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • West Midlands
    4.0 out of 5

    Good replacement fridge shelf

    Good quality replacement fridge shelf. Easy to cut down and fit. obviously not as sturdy as glass but does the job. Best to use for lighter items.

    Ease of fitting 4.0 out of 5
    Quality 4.0 out of 5
    Value 4.0 out of 5
  • 1.0 out of 5

    This is not a fridge shelf

    This is a piece of perspex and in my opinion should not be sold as fridge shelf as it has grooves and scratches which will collect germs and be difficult to clean. You are supposed to cut it to size yourself which is not made clear and it is light and flimsy. I would have returned it but my daughter had disposed of the packaging before I had seen it. If you want to replace a glass shelf with something similar do not buy this, I entered our fridge code and it said it was compatible - this is compatible with any fridge because you cut it to fit - I am very disappointed with this and feel it is very misleading.

    Ease of fitting 1.0 out of 5
    Quality 1.0 out of 5
    Value 1.0 out of 5
See all reviews
Ask a Question

16 Questions and 18 Answers

By Anonymous - - 26 June 2014
  • Well believe it or not ..... I used all I had available A SAW ! Yep normal wood saw and it took me five mins . A couple of tips whilst your trying . Keep the saw as level as possible so cutting more across the length rather than into it and just go along with its OWN speed ! When you near the end take it slowly with NO pressure else it may crack , and its done . By Anonymous - Oxford - 11 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    Check some of the reviews, most seem to have success using a fine toothed saw.

Answer this question
By Mike - Haywards Heath - 20 July 2013
  • (I think the earlier answer may be for a different question!!) This plexiglass is plastic rather than true glass, and the intention is for you to cut the shelf to size. Measure and mark carefully, maybe applying something you can write on, preferably to the removable plastic film ('magic tape' or labels or decorators tape etc). Use either a fine-tooth saw or a jigsaw or a water-cooled diamond-wheel tile-cutting machine, then gently smooth off the cut edges, e.g. with a sanding block. Do NOT try score-and-snap, it doesn't work well on this material. If you could cope with a width of 273.5mm rather than 285mm, you'd just get 2 shelves out of this item. By Ron - Kingston area - 05 August 2014
  • Lloyd Handahu from eSpares
    Lloyd Handahu at eSpares says...

    Closely check whether the door is closing squarely to the cabinet. If not, the door hinges may be faulty. Try removing the door seal to determine whether the door closes further - if it does not this would indicate a fault with the hinges. Otherwise, you may need to replace the seal.

Answer this question


By JOHN - yeovil - 25 January 2017
  • Parminder from eSpares
    Parminder at eSpares says...

    This wouldn't be suitable to hold the weight of freezer containers.

Answer this question
By MoQ - Leeds - 31 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: Alternatively please copy and paste this link into your web browser.

Answer this question

Under weight (like 2 litre milk containers) it tends to bend. All the shelves that came with the fridge have an edging strip that stops them bending. This was a present from my daughter and I would like to use it!

By John Rowley - Swanage - 18 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    We do not sell 'edging' for this product. Either swap shelves for a lighter loaded original, or you can either 'double up' the shelf or glue strips of off cut under to reinforce the shelve.

Answer this question
See all questions and answers
Order within 8:30PM for UK Next Day Delivery