Cut To Size Universal Fridge Plexiglass Shelf Stock Number: ES1562230
Compatible cut to size plexiglass shelf suitable for most fridge freezers
Will this part fit my Appliance?
This product is compatible with:
- Fridges & Freezers - Please Check The Dimensions In The Description
Cut To Size Universal Fridge Plexiglass Shelf
This universal spare is made out of plexiglass - so you can cut it to size yourself. If your current shelf has shattered or cracked, it is best to have it replaced, because it will be unsafe to use and store your items on - and over time it will only become weaker.
It's important to take note of the size (shown in the specification area below), as this will help determine whether this particular shelf is suitable for your fridge.
Specification:
- Size(mm): 550 x 480 x 5
- Cut To Size
Cutting Suggestions:
To cut this glass, use a fine tooth saw like a tenon saw or hacksaw. It can be brittle so go slow and do a trial cut on the 'waste' area. To remove the sharp edges use a file or sandpaper to smooth out the edges.
Compatible spare part suitable for most refrigerators.
PLEASE NOTE: Prior to the purchase of this item please check the dimensions to make sure this is the same size or slightly larger than your original shelf as it can be cut down.
-
Ireland
-
-
Birmingham
16 Questions and 18 Answers
What to cut plexi glass with 2 Answers
- Well believe it or not ..... I used all I had available A SAW ! Yep normal wood saw and it took me five mins . A couple of tips whilst your trying . Keep the saw as level as possible so cutting more across the length rather than into it and just go along with its OWN speed ! When you near the end take it slowly with NO pressure else it may crack , and its done .
-
Chris at eSpares says...
Check some of the reviews, most seem to have success using a fine toothed saw.
- (I think the earlier answer may be for a different question!!) This plexiglass is plastic rather than true glass, and the intention is for you to cut the shelf to size. Measure and mark carefully, maybe applying something you can write on, preferably to the removable plastic film ('magic tape' or labels or decorators tape etc). Use either a fine-tooth saw or a jigsaw or a water-cooled diamond-wheel tile-cutting machine, then gently smooth off the cut edges, e.g. with a sanding block. Do NOT try score-and-snap, it doesn't work well on this material. If you could cope with a width of 273.5mm rather than 285mm, you'd just get 2 shelves out of this item.
-
Lloyd Handahu at eSpares says...
Closely check whether the door is closing squarely to the cabinet. If not, the door hinges may be faulty. Try removing the door seal to determine whether the door closes further - if it does not this would indicate a fault with the hinges. Otherwise, you may need to replace the seal.
CAN THIS BE USED IN A FREEZER ? 1 Answer
MY FREEZER BASKETS ARE BROKEN AND NOW DISCOUNTINUED, COULD THIS BE USED IN THE FREZZER SO THAT I COULD PUT PLASTIC CONTAINERS ON IT ?
-
Parminder at eSpares says...
This wouldn't be suitable to hold the weight of freezer containers.
-
Chris at eSpares says...
In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Under weight (like 2 litre milk containers) it tends to bend. All the shelves that came with the fridge have an edging strip that stops them bending. This was a present from my daughter and I would like to use it!
-
Chris at eSpares says...
We do not sell 'edging' for this product. Either swap shelves for a lighter loaded original, or you can either 'double up' the shelf or glue strips of off cut under to reinforce the shelve.
Great purchase 29 April 2019
Looking for extra space in fridge and found this solution. Easy enough to cut to size. Depth is very good and the shelf holds a decent amount of weight.