Right Hand Hob Assembly Stock Number: ES1445583
Genuine spare part for select models of Rangemaster cookers
Manufactured by Rangemaster
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Right Hand Hob Assembly
Enhance performance and extend your appliance's lifespan with this replacement part. eSpares are your go-to destination for all your appliance spare needs. Elevate your experience today and unlock the full potential of your appliance once again!
Genuine spare part for select models of Rangemaster cookers.
Please check the list of appliances prior to ordering this spare part to make sure it will fit your appliance.
Please Note: This does not include the large burner.
1 Question and 2 Answers
- If you still have your installation manual there are instructions toward the back of the book. I have removed the entire top two sections to replace the ceramic plate warmer, and to check inside. It`s fairly straight forward but first you need to pull the cooker out from the wall - follow the `jacking instructions`, and remove the top vent guard - this will allow you to remove the holding down screws for the top two `plates`. Then you have to remove the two small screws securing the wok burner assembly. The entire plate is gently slid to the right while depressing the wok burner down slightly. You then lift up the plate away from the frame by a few inches checking that you don`t pull the two wires too much. I am a professional engineer by the way. If in any doubt, get someone in and also follow all safety instructions!.
-
Chris at eSpares says...
This should not be a difficult part to replace but it is unlikely to be supplied with fitting instructions.
Will this part fit my appliance?
Check Now
