Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Threaded Glass Oven Lamp Lens (63mm) & Auxillary Tool Stock Number: ES1099279

Threaded Glass Oven Lamp Lens (63mm) & Auxillary Tool - ES1099279
View video

4.7 out of 5 Rated 4.7 out of 5(537 customers)

Spare part for select Bosch, Neff and Siemens cookers

Read more

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Threaded Glass Oven Lamp Lens (63mm) & Auxillary Tool

The oven lamp lens protects your bulb from excessive heat and grease. This replacement lamp comes with a clever auxillary tool to help remove your old lamp cover - so with the help of eSpares, its an easy repair to get your cooker back in shape. The light will be able to shine in your oven again before you know it!


  • Glass
  • Diameter: 63mm
  • Includes: Removal tool
  • Put on the Auxillary tool and turn Anti-Clockwise to loose - turn Clockwise to tighten

Spare part suitable for select models of Bosch, Neff and Siemens cookers.

Please check the suitable model fit list and the diameter of the lens stated in the specification above, to ensure that this is the correct part for your appliance.

Write a review

Here’s what other people are saying about Threaded Glass Oven Lamp Lens (63mm) & Auxillary Tool.

(537 reviews)

4.7 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 3 out of 5
  • Southam
    4.0 out of 5

    It works as it should

    The tool is handy for removing the old lamp cover which was caked in baked on fat and grease, which I've taken out and cleaned, so now I have a spare one. It fits and works as expected

    Ease of fitting 5.0 out of 5
    Quality 4.0 out of 5
    Value 3.0 out of 5
  • East Anglia
    4.0 out of 5

    Good replacement Lamp Cover

    Out Bosch Oven Lamp cover broke while removing it to change bulbs - sheared along thread line leaving a glass ring in the cooker!!. Although we weren't entirely sure this was the correct replacement, couldn't find the oven model number, the details looked correct so we 'took a punt' Fitted perfectly - Given 4 stars for quality and value as this will take time to ascertain.

    Ease of fitting 5.0 out of 5
    Quality 4.0 out of 5
    Value 4.0 out of 5
  • Midlands
    4.0 out of 5

    Good Product - Restrictive Pack Option at Higher Cost

    They now only come as a dual package item and not as separate items. Previously could order lamp lens separately and was cheaper without the tool. Now ordering 3 lenses means I also get 3 tools which is not what customers need or want. It does not add value only adds cost and just puts off people doing repeat business. I now have 4 of these tools and do not want more thank you. Can you sell the lamp lens separately and take off the cost of the tool as another option please.

    Ease of fitting 4.0 out of 5
    Quality 4.0 out of 5
    Value 2.0 out of 5
See all reviews
Ask a Question

22 Questions and 29 Answers

The removal tool doesn't help as the lugs that it grips came off when the bowl cracked off. How do I remove the remaining part of the goas, i.e. the threaded part which is intact as one piece?

By George Chapman - PO33 4RN - 24 September 2014
  • This happened to me yesterday, using the grill. I had changed the bulb over a year ago so it wasn't over tightening. Half the cover fell on my lunch of its own volition as it cracked in half and then the rest came away, leaving the thread in place. It's not fit for purpose if this is happening so often. Will have to smash it out. By MS - Leicester - 22 August 2017
  • Wait until the oven is cold. Remove the bulb. Then get a piece of duct tape. Use most of it to cover the whole of the inside of what`s left of the glass cover and roll the rest over the broken lip. Then with a pair of long nosed pair of pliers gently grip the taped over glass and jiggle it round until it comes out. Covering the glass with tape prevents fragments of glass going everywhere. These covers are prone to breaking especially if hit with the lid of a casserole. Best to place casseroles on a low shelf well away from the light. By Littleted - Norfolk - 24 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    The glass can break due to thermal expansion if excessively tightened. Always refit to loosely hand tight.

  • Wearing appropriate PPE place a towel in the bottom of the oven and remove the trays and grates etc. Get a pair of needle nosed pliers and use to twist the damaged part out. It will start to break as you wrist it, but at least you will get it out. This seems to be a common fault - mine has failed in exactly the same way twice now. By Leefy - Whitehaven - 05 November 2015
  • Same thing happened to my lamp cover. I used a piece of wood with a rubber glove over it. It needed quite a lot of both upward and rotational pressure but I got it out. Thanks to Chris for the tip. By Jeff - Edinburgh - 09 November 2014
  • Chris from eSpares
    Chris at eSpares says...

    You will need to improvise. Try pushing a piece of wood with a cloth around the end into the socket to apply pressure to the end and rotate the stump. Be careful not to injure yourself and use gloves and glasses for protection. You may need to replace the lamp holder if either you damage it or cannot remove the glass.

Answer this question

How often should these break. We have recently had three in two months (Five in four years). I am not overtightening so does this indicate a problem with the glass or the oven itself.

By AR - Blackburn Lancs - 17 September 2016
  • Chris from eSpares
    Chris at eSpares says...

    Re Keith Harris: The usual cause of failure is expansion due to heat, are you using a 'self clean or pyro clean' function as these can produce very high temperatures (400c) to incinerate the deposits?.

  • We too are suffering frequent breaks. Always the threads coming away from the bowl of the cover. Have tried fitting really loosely but same happens. Could it be a design/ manufacturing fault? Perhaps of this batch? Definitely not fit for purpose. The lamp is in the grill by the way. By Keith HARRIS - Cornwall - 10 January 2017
  • Chris from eSpares
    Chris at eSpares says...

    If the cover is tightened when the oven heats the glass expands causing pressure on its surround. Only screw up loosely to prevent this re occuring.

Answer this question
By Norma - Reading, Berkshire - 01 August 2016
  • Chris from eSpares
    Chris at eSpares says...

    This tool fits selected Bosch, Neff and Siemens ovens only and will help remove the lamp cover. Warm the oven and apply WD40 to the joint between glass and holder for a minute before trying to remove if particularly stubborn.

Answer this question

It is a NEFF built in oven B45M52.3GB

By Irene Andrews - Horsham West Sussex - 25 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    Stock Number: ES1123507 is the part you require.

Answer this question

The model number I have is HBN 43B2.0B

By Steve - Stockport, UK - 29 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    Please check your model information. For further help visit the "Finding Model Numbers" page on our website here: Alternatively please copy and paste this link into your web browser.

Answer this question
See all questions and answers
Order within 12AM for UK Next Day Delivery