Get The App From Play Store!

Skip to main content
  • Over 4 million customers served

    Part assist UK call centre

  • Over 319,000 Reviews!

    Rated 4.7/5

  • 15 million parts delivered

    Fast UK Delivery

Dishwasher Drain Pump Stock Number: ES1029530

4.7 out of 5 4.7 out of 5 (21 Reviews)

Dishwasher Drain Pump - ES1029530
View video

4.7 out of 5 4.7 out of 5 (21 Reviews)

Spare part for select models of AEG, Elektro Helios, Electrolux, John Lewis, Tricity Bendix, Juno, Corbero, Rex, Privileg, Zanussi and Kuppersbusch dishwashers

Read more

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Dishwasher Drain Pump

The purpose of the drain pump in your dishwasher is to push water out the bottom of the dishwasher into a drain hose that connects to your kitchen sink. If your dishwasher lets in water but doesn't distribute it and spray it onto your dishes to clean them, there is likely to be a problem with the drain pump.

Use this replacement pump to ensure that your dishwasher's water runs through the spray arms to efficiently reach your dishes, before being drained from the interior of the machine.


  • Type: BPX2-14L
  • Watts: 30w
  • Voltage: 220-240v
  • 50Hz

Spare part for select models of AEG, Elektro Helios, Electrolux, John Lewis, Tricity Bendix, Juno, Corbero, Rex, Privileg, Zanussi and Kuppersbusch dishwashers.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Please note: This is a PNC number dependent spare. Please contact our call centre with your full model and PNC number from the data badge on your appliance.

Write a review

Here’s what other people are saying about Dishwasher Drain Pump.

(21 reviews)

4.7 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 4 out of 5
  • Conor Dublin
    5.0 out of 5

    great replacement part 02 May 2021

    Great value replacement part at a good price. Delivery was very fast too, expected delivery time was 2 weeks but i ordered on a Thursday evening and it was delivered the following Monday.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Karl South Cumbria
    4.0 out of 5

    Cured the problem 15 May 2017

    It's a pump that works so can't fault it in that respect. The actual model delivered did not have the mounting tab which the original and the one in the photo have. It would probably be ok just mounted on the pipes and a tie wrap round it, but, the impeller housing from the original pump fitted this one so all turned out fine. Pipes and wires fit exactly as the original and cured the no draining fault so happy with the pump.

    Ease of fitting 4.0 out of 5
    Quality 4.0 out of 5
    Value 4.0 out of 5
  • kieren dight WsM
    5.0 out of 5

    little different than the old design 01 May 2016

    all works perfect but be ware on some models there was a plastic mounting clip that the replacement one does not have, but a cable-tie should be good enough to secure it in place

    Ease of fitting 4.0 out of 5
    Quality 4.0 out of 5
    Value 3.0 out of 5
See all reviews
Ask a Question

4 Questions and 3 Answers

machine is 20 years old

By Bernard Duffy - 17 Deben Road Suffolk Ip171ya - 10 October 2017
  • Dean from eSpares
    Dean at eSpares says...

    Check if the water is clean or dirty as it may be caused by back filling from the plumbing, test the water valve to determine if it’s letting in water when off before testing the pressure system. For more help check out our new advice centre just copy and paste into your browser.

Answer this question
By Roysta - Broadstairs Kent - 04 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    The wash pump is Stock Number: ES567547. Check the spray arms rotate freely and are not blocked or catching before suspecting this for the problem.

Answer this question

Hi, I have a Zanussi DE6744S which fills up with water and then heats it and cleans the dishes but towards the end of the cycle it will stop and the lights will flash when I open it I find it full of water, so I take the machine out to the garden (Full) and then put the Drain pipe to the floor and it will drain all the water out, my question is "Do I need a new Drain pump"? Regards Younes

By Younes1000 - - 03 August 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    We cannot give out technical advice unfortunately. Please contact a technician or Zanussi directly for assistance before replacing any parts.

Answer this question

Will this part fit my appliance?

Check Now

See our reviews

Dishwasher Drain Pump

(inc. VAT)