Answer this Question (3 Answers)

• 

  Samara at eSpares says...

  In addendum to the information left by Derek645 - after unplugging the machine go and take a 10 minute tea break. Some components within the machine will hold electrical charge and should be allowed to drain before you start work.

• Rule 1: Turn off the power, some parts are live internally even with the machine off. Locate Motor. look at the end with the wired connector. adjacent to that you will see the ends of the white casing of the brushes. carefully remove the electrical spade connections, then push white retaining clip on brush, brush slides out. replace then turn spring release clip on side of brush (look at the old brush to locate and compare with new) By derek645 - portsmouth - 01 November 2009
• you take off the top cover (3 screws at back) to get into motor ,very easy to fit. By skyjet - aberdeen - 29 October 2009