Dryer is heating ok but not drying.
I have a DRCS 68W that is revolving and getting very hot but the clothes are just staying wet. Its like no air is circulating or something. I was hoping to find a fan or something as a part but none are listed. Not sure what part to replace, any ideas please?
Answer this Question (4 Answers)
- Thank you Chris, I had already cleaned the condensor and filter so I can eliminate that. The problem happened suddenly so i guess that also removes the filter from the suspect list. Thank you
-
Chris at eSpares says...
The belt goes round the outside of the drum down and around the motor spindle between the two belt tension wheels. These pinch the belt from either side to remove any slack and tension the belt.
-
Chris at eSpares says...
The part you refer to is not likely to be the problem. Dismantle the drier heater assembly on the top of the drum and check for signs of damage to the drier heater element.
-
Chris at eSpares says...
The first thing you need to do is check and clean the filter and the condenser at the bottom of the drier. Take the condenser out and flush warm water through to flush out any fluff or lint build up.
Tumble Dryer Heater Element - 2000W Stock Number: ES1435433
Genuine spare part for select models of Beko and Flavel tumble dryers
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices