Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Bosch Dishwasher Error Code E25

If It has been proven that using the dishwasher to clean your plates and cutlery uses less water than washing up by hand. Unfortunately, however like other kitchen appliances, the dishwasher can plunge into various faults.

If your dishwasher is beaming at you with unusual codes that you’ve not seen before, don’t worry as we’ve got a few tips and tricks that can assist you in getting things rinsing again.

We can hopefully help you identify what's causing your dishwasher to display an E25 error code, and help you get it resolved to bring your dishwasher back to life.

 

 

Cause 1

Blocked Drain Pump

The drain pump is that crucial component that forces the water through the drain hose, so having a blocked pump will not only cause draining issues, but it is likely to bring the wash cycle to stall unexpectedly too.

Safety First! Please ensure that you have disconnected the appliance from the mains before starting any repair.

  • Glassware can break during the wash - if this has happened the shards may have fallen and gathered within the pump.
  • Using a multimeter, test the terminals and if you don’t get a reading of between 100 and 300 Ohms - or a reading of zero or excessively over - then the pump has failed and you will require a new replacement pump.

If you need help using a multimeter you can check out our handy guide - How To Use A Multimeter.

We also have a step-by-step guide on how to change a drain pump - just click below.

How To >