Karcher Pressure Washer K2 - K7 Hand Gun - C-Clip Version Stock Number: ES956775
This pressure washer spray hand gun C-clip version places the control in your hands, helping you achieve the best results from your pressure washer
I have a 520M power washer. The hand gun is leaking when i switch it on.What might be wrong with it? 4 Answers
After the heavy frost when I used the power washer the hand gun leaked water. Is it possible to repair the gun? There are 4 star screws and others that look like screws. How do i remove these to see if a part is damaged?
- After use once disconected from water and pull the trigger. This releases any pressure. stopping expansion. this is important summer and winter. his I have learned at my expence
- YES you are better to buy a new gun I found that out the hard way.
- I have the same problem so I bought a new gun and what do you know it happened again but this time it happened as soon as i put the new one in.and i got it off ebay but they will not replace it they said it was my fault as it was the way I connected the hose to it .something to do with the flow of water and the valve in the connecter.anyway I opened it up to find it was just a 0 ring so I replaced it but now the hole gun handle just pops open every time \i try it.So it's a new gun again and hope 3rd time lucky.
- YOU ARE BETTER TO BUY A REPLACEMENT HAND GUN
It is a K3.91
-
Dean at eSpares says...
Check the O ring seals before suspecting anything else, see our range http://www.espares.co.uk/search?SearchTerm=karcher%20o%20ring just copy and paste into your browser.
-
Dean at eSpares says...
If the nozzle is ok it is likely to be the gun that is required.
Karcher K7.85
-
Parminder at eSpares says...
This gun does not have a pressure gauge.
-
Chris at eSpares says...
We believe this is supplied with the c clip to lock the hose to the gun.
-
Chris at eSpares says...
This should be suitable but check with your model number to confirm.
Hi, does this gun have screws that hold the two parts together, mine has some screws and some injection molded welded making it not easy to get inside and repair, you said this is a new designed do you know if there was a problem with the original design as on mine part of the plastic where the Hose enters broke due to the pressure through the hose. Thanks
-
Chris at eSpares says...
The usual cause of damage to the gun and pressure washer is freezing in cold weather. We do not have details on if this part can be dismantled or other reasons it may fail.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
-
Chris at eSpares says...
The gun can certainly be used on your appliance and fit the attachments as long as your hose has a push fit connection onto your old gun it can be transferred to this one.
I have new hose but I can't take of old one of.
-
Chris at eSpares says...
See your user instructions or download a similar manual: http://www.espares.co.uk/usermanuals/search?SearchPhrase=karcher+k5 as this shows how to replace this hose.
Will this part fit my appliance?
Check Now