Creda Main Oven Fan Motor Assembly Stock Number: ES553178
Genuine spare part suitable for select models of Hotpoint, Creda, Cannon, Jackson and Indesit cookers
Hotpoint DY 46x
-
eSpares Staff at eSpares says...
Take the fan blade off and turn the fan motor shaft to test the movement, it should be free to turn and if not it is likely the bearings inside are causing it too run slow.
Hot point DY 46
-
eSpares Staff at eSpares says...
It is likely to be the fan bearing causing it to run slow so test the fan.
Moved house and inherited this cooker. Any ideas of what to check
-
Chris at eSpares says...
For repair information please see our advice centre at the top of the page.
-
Parminder at eSpares says...
Unfortunately we have not yet made a video for your specific model, however we are constantly uploading new videos. The video in the description should give you a basic guide.
Fan turns slowly and sometimes stops the element has just tripped fuse and now does not heat up. It's a indesit ID60C2 S do you think it's a fan problem or element. Thanks
-
Chris at eSpares says...
The fan is failing and may now have damaged the element so both may be needed.
I have a Indesit fimd23bks the fan turns slowly could it be the motor also do you do replacement motors 1 Answer
-
Chris at eSpares says...
The problem is likely to be the fan assembly Stock Number: ES867046
I have a Creda Plan Continental Oven-no other identifying number-will this motor assembly fit this oven? 1 Answer
-
Chris at eSpares says...
Without the full details we cannot confirm suitability. If unsuitable you can return subject to our policy listed at: http://www.espares.co.uk/returns
Hotpoint ew81p trips out the power when main oven is turned on after a few mins I think it's the fan motor thanks
-
Chris at eSpares says...
The problem is likely to be the element not the fan and if choosing a compatible part you must confirm it matches the dimensions of your part.
Do I need to take the cooker (Hotpoint DY46X)out of its housing to fit a new fan motor. Thanks 1 Answer
- Not sure of your model, but on my Creda I had to remove the oven, 4 screws thats all that was holding it into the housing
Will this part fit my appliance?
Check Now