Indesit Washing Machine Drain Pump (Round Top Screw On) : Askoll M231 XP (M224 XP) for WIB111UK Stock Number: ES1087464
Fits most washing machines matching the specifications, please check before ordering
I fitted this pump to a hec1050w, however the pump will not turn off the water enters the machine and is immediately pumped out again. I have checked the connection and it is fitted correctly Neutral to Neutral and Live to Live what is the cause of this? 1 Answer
- Program module would control the pump supply this would be the fist place to examine
fitted a new pump to my LG as it was not draining. When fitted I switched the machine on an could hear straight away the pump spinning and water draining. Unfortunatley the pump does not switch off. Water is coming into the machine and getting pumped stra 1 Answer
-
Rory at eSpares says...
Hi Pacman, it sounds as the pump may be wired wrongly. I'd advise refitting it, while double and triple checking the wiring. Hopefully when it's refitted it'll work correctly.
the back of this pump has two single fittings.my original has one double bladed fitting.so how do you fit it?or do i have to order the original correct part no 56835 for my washer/dryer indesit WIDXL126.
- if you ar referring to the 0.25" spade connectors, then because the power supply is 250VAC you can connect one wire to each of the spades any way round, any way you can, it will still work. just make sure the insulator material is good if you have to split the connector.
My washing machine will take water in but stops after the drum turns a few times and will not take anymore water in or click to the next stage and it will not spin either......we have replaced the carbon brushes thinking it was them and it still does not do a wash or spin wht could be wrong with my washing machine.
-
eSparesMalindi at eSpares says...
Sorry we cannot give out technical advice unfortunately. Please contact an engineer or the manufacturer of your appliance for support.
When I put on any wash program it reaches spin cycle, water does not drain, the drum does not spin and there is a loud grinding noise from the bottom of the machine. could it be the pump or the motor which is faulty?
- my samsung washer had same problem, if your machine has a 'debris filter' check that first. if thats clear its the drain pump, got one from espares (£10.99) & works a treat! easy fix,unplug & tilt machine backwards remove 2 hoses (beware water will come out!) remove 2 wires & 2 mounting screws, refit new one. samsung quoted £43.99 for identical part!
the machine empties ,but will not spin..can you tell me what part i need/
-
eSparesMalindi at eSpares says...
Unfortunately we cannot give out technical advice. Please contact an engineer for help.
This pump says it fits a wm1090 fb, but will it fit a wm 1090 fhb? Will it fit into a 60mm pump housing? thanks sam
-
eSparesMalindi at eSpares says...
This part will not fit your appliance due to the dimensions. You will need the genuine part rather than this universal part. This is the part you need. http://www.espares.co.uk/part/washing-machines/p/1085/0/0/0/507403/washing-machine-water-dra.html
I have a Candy GO482/2-80 washing machine which is not spinning on 1400 setting and the stain vanish button is flashing 3 times then a pause 0 Answers
I have checked the pump for any debris and it is clear and the outlet pipe seems to be clear. I have bought several items from your site and have always managed to fit the items easily. THANK YOU
Noise seems to be eminating from pump area on wae24162uk/01. Also my elcb on electrical supply has tripped out during washing machine running. Could it be a seal in the pump?