Karcher Pressure Washer Hand Spray Gun for K6.50MB

Stock Number: ES956775

Manufactured by Karcher

In Stock Available for immediate despatch

Rated 4.7 out of 5 (107 customer reviews)

Read all reviews Write a review

enlarge image

Fits the following models [?]

All Karcher Domestic K5 Series Pressure Washers, Karcher Domestic K6 Series Pressure Washers and Karcher Domestic K7 Series Pressure Washers and the models listed below.

Click on your brand to see the model numbers this part fits.

Karcher Pressure Washers (188)

Description

This is a genuine replacement Pressure Washer Hand Spray Gun suitable for select Karcher domestic models.

The Karcher spares reference is 2.641-959.0

Please note: This spare is chassis number dependent. Please contact our call centre with the information from the data badge on your appliance. The chassis number will look something like 1.181-504.0.

Other part numbers for this item: 2.641-202.0, 26412020, 26412030, 26419590, 4.775-271.0, 4.775-339.0, 4.775-389.0, 4.775-401.0, 4.775-423.0, 4.775-500.0, 4.775-501.0, 4.775-502.0, 4.775-567.0, 4039784058606, 4039784163560, 47753390, 47753890, 47754010, 47754230, 47755000, 47755020, 47755670, ES1251188

How to replace a Karcher hose and handgun

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Easy to use and fitted first time 13 May 2013
- Overall Rating 5.0 out of 5
- Ease of fitting 5.0 out of 5
- Quality 5.0 out of 5
- Value 3.0 out of 5
By HockeyMan - Leicestershire

Replacement for original damaged by frost over winter. Weak point where pipe attaches to gun - TIP - take gun off if not using and avoid ice damage - fractures where clips holds pipe onto gun.
Very much improved spray gun 08 May 2013
- Overall Rating 5.0 out of 5
- Ease of fitting 5.0 out of 5
- Quality 5.0 out of 5
- Value 3.0 out of 5
By pat20 - Birmingham

this was an updated replacement for a B602 washer and I found it very much improved on the original. As there are many Karcher parts I had some difficulty finding the right one on the e spares web site so I checked the part Number with Karcher before ordering.
Replacement part, Very satisfied 08 May 2013
- Overall Rating 5.0 out of 5
- Ease of fitting 5.0 out of 5
- Quality 5.0 out of 5
- Value 5.0 out of 5
By Ray - Milton Keynes

My existing pressure washer spray gun leaked and had no pressure, after trying to repair it I gave up and order a new one, the design is better with the hose fitting in front of the handle, it fitted easily and works brilliantly.

Q I have a 520M power washer. The hand gun is leaking when i switch it on.What might be wrong with it? 4 Answers
After the heavy frost when I used the power washer the hand gun leaked water. Is it possible to repair the gun? There are 4 star screws and others that look like screws. How do i remove these to see if a part is damaged?

By charles5 - Dundee - 22 January 2010
- A
  After use once disconected from water and pull the trigger. This releases any pressure. stopping expansion. this is important summer and winter. his I have learned at my expence
  
  By pvs75 - dover - 01 May 2010
- A
  YES you are better to buy a new gun I found that out the hard way.
  
  By trsuk1 - Wallsend - 29 April 2010
- A
  I have the same problem so I bought a new gun and what do you know it happened again but this time it happened as soon as i put the new one in.and i got it off ebay but they will not replace it they said it was my fault as it was the way I connected the hose to it .something to do with the flow of water and the valve in the connecter.anyway I opened it up to find it was just a 0 ring so I replaced it but now the hole gun handle just pops open every time \i try it.So it's a new gun again and hope 3rd time lucky.
  
  By trsuk1 - Wallsend - 29 April 2010
- A
  YOU ARE BETTER TO BUY A REPLACEMENT HAND GUN
  
  By Anonymous - Glasgow - 10 February 2010
Answer this question
Q k785 karcher gun 1 Answer
will this gun fit with my high presure washer K785? thx.

By ericng - FRANCE - 21 June 2009
- A
  yes it will as i have one thesame
  
  By magdalena - london - 10 July 2009
Answer this question
Q Will this fit a Karcher model B602 1 Answer
There is also a number 357487 on machine label. I have ordered this online already order ref 1058463.

By Anonymous - 13 April 2009
- A
  Hi markabson, this gun will fit your washer.
  
  By Rory - 08 June 2009
Answer this question
Q "o" rings and washers 1 Answer
can i purchase replacement "o" rings and washers to connect hose to pressure pistol

By DannyB - Essex - 18 January 2009
- A
  Hi Dannyb, o-rings can be found here: http://www.espares.co.uk/part/pressure-washers/karcher/p/1315/877/0/0/537802/o-ring-seal---pack-of-5.html and gaskets here: http://www.espares.co.uk/parts/pressure-washers/karcher/k4.97m/p/1315/877/0/538577?ms=6.363-031.0
  
  By Rory - 20 February 2009
Answer this question
Q Which connetor do I need to fit wheel rim brush to pistol? 1 Answer
I bought a Kracher K5.85 Pressure washer back in September. Trying to fit a Kracher Wheel rim brush to the pistol, broke a piece inside the pistol, so now dosn't work as it should. Can you tell me what connector I need to fit the wheel rim brush to the pistol? I can't see one in your spares pages. Thank you.

By Amanda - 03 December 2008
- A
  Hi Amanda If your pistol is broken, this replacement can be easily screwed on to the hose with this gasket: http://www.espares.co.uk/part/pressure-washers/karcher/p/1315/877/0/0/538220/gasket.html
  
  By Rory - 04 December 2008
Answer this question