Brand new seal to prevent your washing machine leaking from the front door. Rubber door gaskets take a lot of stick and can tear and break, so it's handy to be able to replace them easily.
Looking for a replacement door seal for your Ariston, Creda, Hotpoint or Indesit Washing Machine? This might be the part for you. Prior to ordering, please check the list of appliances to ensure this is the right part for you.
How to replace a washing machine door seal
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
QNew seal for washing machine but requires a thew slams to get door to lock is this normal and will it get better with time it is the correct part1 Answer
By John boy- Hampshire
- 08 January 2014
A new door seal is naturally going to be a tighter fit and will mould to the gap as it is repeatedly heated during washing. If the seal fitted the machine and does not leak then it is going to be the correct seal. You could compare with a machine in a showroom as they too are likely to be difficult to close at first.
QI have the wdf740 Washer/dryer - can you point me at video for replacing door seal on this machine?1 Answer
I have the wdf740 Aquarius Hotpoint Washer/dryer - can you point me at video for this repair on this machine as I have the seal now, but the front is not removable on my machine?? Thanks
By Anonymous- England
- 19 November 2013
The closest video we have for this repair is: how to replacement an AEG washing machines door seal in our advice centre. It will be necessary (and a little difficult) to remove and fit this seal through the door opening.
I purchased a new door seal with the intention of replacing it myself. However, the front of my WML540 seems to be spot welded and not attached with screws as shown in the video. I cant see how to get to the drum to remove that side of the seal. Any suggestions how to proceed? Thanks
- 07 August 2013
It should be possible to carry out this repair through the door porthole. Try leaning the machine back against a wall to make more space between the front of the drum and the cabinet.