Indesit Washing Machine Door Interlock

Stock Number: ES548529

Manufactured by Indesit

In Stock Available for immediate despatch

Rated 4.9 out of 5 (136 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Description

Are you looking for a replacement locking mechanism for your washing machine? Keep your washer functioning smoothly with this spare from Indesit.

This is a genuine Indesit part and fits select models of Ariston, Creda, Hotpoint, Indesit and New World washing machines. Prior to purchase, please see the list of appliances to ensure that this is the right part for you.

Please note the Door Interlock you receive may look different to published image as Indesit update this part regularly 

Door lock plug and loom for some models: Stock Number: ES1130454

Note: The lock on your machine may not have any screws locating it but may have plastic 'bumps' instead.

If this is the case carefully push on the bumps with the tip of a screwdriver. This will allow them to slip under the front panel as you slide the lock to one side.

 

How to replace a washing machine door lock

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.9 out of 5 (136 customers)
Write a review
  • Easy Repair

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Suffolk

    Washing machine showing door unlocked when it was shut. Replacing interlock took about 10 mins, guided by helpful e-spares video on You Tube. Problem solved!
  • So easy to fit (for my daughter)

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Bolton

    Bought this item from a local supplier the day before I went on holiday, and even though I pointed out that the design looked different I was assured it was ok, IT WASN'T. I ordered the part that night from espares, went on holiday, and to my complete surprise I received a message from my daughter a couple of days later to say she had received the part in the post, watched the on line video and fitting the part, bingo the machine was working ok again. Well done daughter & espares for saving the the day, and one less job for me to do!
  • Good Door Switch

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Derbyshire

    I purchased from this supplier for the cost, less than half the cost of the manufactures web site, The reason for this purchase, was that the washing machine door had to be banged shut to get the switch to make contact, i think this was due to the orginal being held on to the machine by push on plastic. The replacement needed to be screwed to the machine, however the new part did not come with screws, so i had to find a couple of screws that fitted. Having fitted it, the door now only needs to be shut firmly to make the switch.

Ask & Answer

(32 Questions and 27 Answers) Ask a question
  • Q Hotpoint washing machine flashing "door" 1 Answer

    Washing machine wouldnt start. Had "door" flashing in LED window changed door interlock from espares still not going and "door" still flashing help!!!!!

    By Gary - bromsgrove - 18 August 2015

    • A
      Check the motor brushes and see our video: How to Diagnose Washing Machine Motor Problems www.espares.co.uk/advice/7/1730

      By Chris eSpares Staff - 19 August 2015

  • Q i have a hotpoint ultima wmud 962 washing machine, door shuts but cannot open it after wash? would this part be any good please 1 Answer

    By Ann Johns - ebbw vale - 07 July 2015

    • A
      The problem may be due to a fault elsewhere but if no lights are flashing replace the lock. If the serial number starts 21016 or before you need Stock Number: ES1635603 If the serial number starts 21017 or after you need Stock Number: ES1665555

      By Chris eSpares Staff - 07 July 2015

  • Q I have an indesit IWDC6125 Washer/Dryer. When I try to start the cycle the red LED for the door lock starts flashing and nothing happens. I'd be grateful for any help with this fault. 1 Answer

    I have recently replaced the carbon brushes. There are no other flashing lights on the machine.

    By Jim McKay - Scotland - 25 May 2015

    • A
      If you are sure the motor is OK then try replacing the door lock.

      By Chris eSpares Staff - 26 May 2015

  • Q i just replaced the door interlock but problem not fixed . the door won't lock but the machine thinks the door is locked & it is possible to do a wash with door open. help please Ariston A1436. 1 Answer

    By tim - london sw4 - 26 December 2014

    • A
      Check the motor brushes as if worn they can give the impression of a faulty door lock.

      By Chris eSpares Staff - 29 December 2014

  • Q My Hoover dyn8164d 1 Answer

    Door lock light flashes and machine will not start. I had put in a load and initially it started working but when I returned to remove the washing the cycle had been interrupted by a tripped fuse. I fixed this but since then the door lock continues to flash and machine will hot start

    By Anonymous - Haute garonne France - 23 November 2014

    • A
      See our video to identify your fault code and find your problem: How to Understand Hoover and Candy Washing Machine Error Codes http://www.espares.co.uk/advice/7/2531/how-to-understand-hoover-and-candy-washing-machine-error-codes

      By Chris eSpares Staff - 24 November 2014