Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Karcher 15m Drain Cleaning Kit Stock Number: ES547362

Karcher 15m Drain Cleaning Kit - ES547362
View video

4.6 out of 5 Rated 4.6 out of 5(30 customers)

Clears blocked pipes and drains without the need for harsh chemicals - compatible with all Karcher domestic pressure washers

Read more

Manufactured by Karcher

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Will this part fit my Appliance?

This product is compatible with:

  • Karcher Domestic K1 Series Pressure Washers
  • Karcher Domestic K2 Series Pressure Washers
  • Karcher Domestic K3 Series Pressure Washers
  • Karcher Domestic K4 Series Pressure Washers
  • Karcher Domestic K5 Series Pressure Washers
  • Karcher Domestic K6 Series Pressure Washers
  • Karcher Domestic K7 Series Pressure Washers
  • Karcher Domestic KB Series Pressure Washers

Karcher Drain Cleaning Kit - 15m

bullet point Clears blocked pipes and drains without harsh chemicals
bullet point Convenient marker rings to show progress along the pipe
bullet point Extra short brass nozzle for maximum flexibility in the pipe
bullet point Works effectively indoors & outdoors to clear problem areas…

Save money on expensive plumber call-outs by clearing your drains with this nifty Kärcher drain cleaning kit. Don't believe us? Check out the customer reviews! It clears blocked pipes and drains without the need for chemicals using four backwards-firing jets that project the kit to the blockage.

Karcher pipe and drain cleaning kit


  • Length: 15 metres
  • Pressure: 160 bar max
  • Max water temperature: 60°C

eSpares also stock a Karcher 7.5 Metre drain cleaning kit.

You must have a bayonet-fit gun to use the drain cleaning kit, rather than a screw-fit gun. Genuine spare part for select models of Karcher pressure washer

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Karcher spares reference: 2.637-767.0


Write a review

Here’s what other people are saying about Karcher 15m Drain Cleaning Kit.

(30 reviews)

4.6 out of 5

Ease of fitting 5 out of 5
Quality 5 out of 5
Value 5 out of 5
  • North Devon
    5.0 out of 5

    Drain buster

    Used this twice up to now. Cleared rainwater drain and sewer drain. Easy to use better than rods.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Monmouthshire
    5.0 out of 5

    Very Good product

    The hose was used to clean out a kitchen drain which had become blocked with fat deposits. It was very easy to fit to the pressure washer and fed itself into the drain around a bend (less than 90 deg.), just needing very gentle assistance to get around the bend, for the whole of its 15m length: enough to reach the inspection cover. Going the other way towards the outdoor trap on the sink and dishwasher outlets the hose would not go around the bend and down into the sump but I was able to feed the end around the bottom of the sump and up to meet the point accessible from the downstream rodding point. One very stubborn lump of fat just around the bottom of the sump had to be cleared with a bent knife otherwise the hose did a very good job. I feel it represents very good value for money and I am glad I had the 15m length. It is probably most effective if used on a regular (fairly infrequent) basis to keep the drain clear.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Derbyshire
    5.0 out of 5

    15mtr Drain cleaning kit

    Excellent Product Used this with my K4 model to clear a severely blocked drain took a bit of toing and froing with the hose to force a way through which worked and away it went had called professional help in at first but they said it was our problem as it was deemed to be on our property and not the street drainage system fantastic piece of equipment and the great thing is it feeds itself through the pipe.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

22 Questions and 30 Answers

By Morr - - 02 June 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Desmond, Karcher part number 4.762-062 is available on our website here:

  • I have been using this adaptor for my Karcher machine and this drain clearing accessory for clearing drains. It is amazing to watch it fly UP a drain pipe! The part Karcher No.4.762-062 is readily available in Europe and the US but, not apparently in the UK. By Desmond - Surrey - 21 February 2010
  • I bought one of these kits many years ago and, as my Karcher machine was an older one with screw fitting I bought an adaptor at the same time. I shall add a photograph later on for information. By Desmond - Surrey - 21 February 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi Morr, unfortunately HD series washers are commercial units and therefore to powerful for domestic accessories such as the drain cleaning kit.

Answer this question

Clearing guttering 2 Answers

Might the Drain Cleaning Kit (pipe) be fed horozontally along my guttering to blow out acculumateed moss and blockages?? (Or would it blow itself out of the guttering because of the high pressure??).

By Decklo - Maidenhead - 18 February 2010
  • I would not use this for cleaning out the guttering as it would blow itself out of it due to the high pressure. This is intended for drain cleaning only By Welshman1 - West Wales - 13 April 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi, the kit wouldn't be suitable for use in a horizontal half-pipe - it would start snaking and not move forwards. It can be used in horizontal pipes that are 360 degrees.

Answer this question

We have a communal drain which is blocked but the blocakage is futher than 15m from the manhole, could be upto 50m but uncertain. Does the 15m cable have to reach the blockage to unclear it.

By Singh - Cardiff, Wales - 05 July 2009
  • The answer given already is correct in that the hose does have to reach the blockage but the following may be of interest. My drain problem area is just about 15m from the access. The jetter has worked brilliantly but there is a risk that in future the blockage could be a bit further back and unreachable. I went to a local high pressure hose specialist and got him to cut my hose about 18 inches from the pressure washer end and insert a high pressure connector in it. Then I got him to make me up a 5 metre length of hose with a connector at each end so that if I need to, I can extend it to 20 metres. The extra weight of the extension and connectors will put a limit on how long you can make it, because at some point the drag of the weight will stop the hose going up the drain. 50 metres overall sounds as though it would be a bit much to me and in any case the cost would be quite significant. It cost me £20 and was done while I waited. By OldDude - Greater Manchester - 23 July 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Singh, the drain cleaning kit can only remove blockages it that the end of it coems in to physical contact with. The kit is jet powered, with backward streaming jets of water propelling the nub forward at a high pace, removing any debris in the pipe.

Answer this question
By stodge09 - - 17 June 2009
  • I had an older model and it fitted perfectly into the gun. I just removed the lance fitting and in it went. By billythelily - Essex - 04 May 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi Stodge09, I'll need your model's seven digit product number to make sure this kit is suitable for your washer. For help finding it, use this page:

Answer this question

I have a blocked shower drain, the pipe is only 22mm. It runs for about 1.5m under the shower tray, then bends downwards through almost 90 degrees into the main drain. If this kit can cope with this bend I'll order it right now from espares. thanks!

By hopmah - Buckinghamshire, UK - 03 February 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Hopmah, although the pipe would fit in to the drain, I think it would probably just come to a halt at the 90 degree bend. If the bend was closer to the entry point you could have manually entered the pipe and it would've fit round due to the natural curvature of the pipe, however I think because it has to travel 1.5m, it'll just crash in to the wall of the pipe.

  • The hose is heavy duty pressure hose and has a metal part on the end with the holes for the jets to come out. I do not personally think it will bend 90 degrees in only 22mm pipe. The hose itself is a good 10-15mm with the end piece. By SimonNeedsaSparePart - northampton - 02 March 2009
Answer this question
See all questions and answers
Order within 9PM for UK Next Day Delivery