Universal Cooker Hood 1m Vent Kit

Stock Number: ES509971

Only 5 left in stock Available for immediate despatch

Rated 3.9 out of 5 (15 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Cooker Hoods

Description

Universal Cooker Hood 1m Vent Kit

If you need to vent your cooker hood directly to the outside wall, this kit may be what you're after. It's easy to fit, and eliminates steam and cooking odours. The kit contains all parts required for installation and complete fitting instructions.

Specification:

  • Kit includes: 1x PVC flexible hose, 2x threaded hose connectors, 1x gravity wall outlet, 1x round wall plate, 1x screw pack (8 screws, 8 raw plugs), instruction leaflet
  • Max hose length: 1 metre
  • Diameter: 125mm/5 inches
  • Colour: White

This universal vent kit fits most cooker hoods with a 5 inch diameter hose.

More product images

Product Reviews

Rated 3.9 out of 5 (15 customers)
Write a review
  • Fast and affordable service

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Port Moresby

    I was amazed at how fast the product was sent and how much I saved (50%) in ordering online than purchasing from the local outlet
  • More development needed.

    • 3.0 out of 5
    • 3.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5

    By - Bristol

    This kit is partly OK but needs a bit more development. I've ended up glueing and clamping the flexi tube to the external vent and even with that there was not really sufficient thickness of material around the hole through the wall to satisfactorily drill, plug and screw the vent plate to the wall. Was I advised to bore a 150mm / 6inch hole/ ? Had I bored a 150mm hole then the vent plate would have had no means of attachment as it's not big enough for the fixing screws to be outside the bored hole!. This kit is OK ish as an amateur prototype but should not be on the market in its present state. Still, I'm happy to have managed to install it as the extractor does now vent smells and vapours to the outside. What is the point of them if they do not?
  • OK, but not quite

    • 3.0 out of 5
    • 4.0 out of 5
    • 3.0 out of 5
    • 2.0 out of 5

    By - Cambridge

    Despite this being the kit, and the source of the kit, suggested by the supplier of my new extractor hood, the size of the kit meant that fitting was a more complex process than it needed to be. The guy fitting my new kitchen explained that he could not use a standard bit to make the hole for the hose, because the size and diameter meant that a standard drill bit would be a couple of mm too small. He was able to work around this, but I would suggest that if someone was trying to fit this themselves, they might struggle.

Ask & Answer

(12 Questions and 12 Answers) Ask a question
  • Q converting a100mm hole to take a 120mm extracter fitting 1 Answer

    the hole in the wall is 100mm 4inch. the new extractor fan is 120 mm 5inch Is there a kit that will convert it. Thank you.

    By Nanny Ogg - Mansfield - 02 June 2014

    • A
      See our part Stock Number: ES1554678

      By Chris eSpares Staff - 03 June 2014

  • Q My cooker hood is not vented, how can I cut down on condensation when cooking 1 Answer

    By paulr65 - 21 August 2009

    • A
      We also bought this kit to cut down on condensation. Our hood is not on an external wall so I only needed certain items from the kit. As we are in a bungalow we took a (new) longer vent pipe into the roof space and then out through a soffit grille. As it's only just been fitted, it's too early to say whether it will be effective. It may be that our vent pipe is too long to work well. The main issue with the universal fitting is that it didn't fit our Neff hood particularly well and some degree of improvisation (and gaffer tape) was required. I'd suggest looking for a specific branded version if one is available but this kit should do the job if you can't find anything else.

      By MrBodgeit - Chester - 01 November 2009

  • Q Smeg KTS75. Converting from vertical to horizontal outtake 1 Answer

    Need to reduce from 150mm to 100mm. Also, how do we block the vertical outlet? Hood purchased without instructions or product leaflet.

    By Mette - Grimsby - 07 July 2009

    • A
      Hi, unfortunately we don't stock any parts compatible with the KTS75, sorry.

      By Rory eSpares Staff - 13 July 2009

  • Q I need 2m run of duct, suggestions please, or is another kit available? 1 Answer

    By puttenham - guildford - 07 May 2009

    • A
      Hi, I'd recommend this 4 metre hose: http://www.espares.co.uk/part/cooker-hoods/p/1091/0/0/0/510012/4-metre-universal-vent-ho.html

      By Rory eSpares Staff - 13 July 2009

  • Q Do you Supply 1 Answer

    Hi i have an Electrolux EFI 60011 cooker hood the extractor coupling ring is 11.5cm wide i need a hose 2.5 metres in length can you supply i also need a filter as it came without one Thanks

    By Freewayandbob - Hambleton Lancs - 01 May 2009

    • A
      Hi Freewayandbob, I'd recommend this 4 metre hose: http://www.espares.co.uk/part/cooker-hoods/electrolux/p/1091/15/0/0/510012/4-metre-universal-vent-ho.html You can also see a list of filters suitable for your hood here: http://www.espares.co.uk/parts/cooker-hoods/electrolux/efi60011s/p/1091/15/0/1026537?k=filter

      By Rory eSpares Staff - 13 July 2009