If your vacuum cleaner has stopped picking up dirt like it should, the drive belt may have snapped. The drive belt helps to turn the agitator brush in your vacuum, which beats dirt and dust out of your carpets. If this is the case, eSpares has just the solution you need. Check out these genuine Dyson drive belts, which will get your vacuum cleaner back to 100% so your carpets will be spotless again in no time at all!
Includes 2 x belts
Made from specially developed rubber compound for increased belt life
Inner Diameter: 90mm
Includes fitting instructions
Prior to ordering, please check the list of appliances to ensure this is the right part for your model.
Need more Dyson parts? Check out or complete selection of Dyson spares. If you're looking for a lower cost alternative, try these compatible parts.
Dyson spares reference: 0222002F
How to replace a Dyson DC04 belt
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
QDC14 motor runs, vacuum high, belt seems ok, but front brush roller does not turn1 Answer
By gdt- leicester, UK
- 01 February 2016
There is a clutch 'knob' on the left of the base that when lifted to the park position rotates and stops the brushes. If this is in the off position the brushes do not engage when lowered. If this knob turns correctly then the clutch belt may have failed from the motor to the clutch unit.
QI have the DC07 all floors that needs two belts, does this pack do the clutch and the motor belt.1 Answer
By Sandi- Fife
- 26 September 2010
Hi Sandi, this is a pack of 2 drive, or motor, belts. The clutch belt is this one: http://www.espares.co.uk/part/dyson/dc07-all-floors/p/1086/716/6/420506/188716/vacuum-cleaner-clutch-bel.html?ms=902514-01