Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Zanussi Tumble Dryer Polyvee Drive Belt - 1975 H7 for TCS374E Stock Number: ES501196

Zanussi Tumble Dryer Polyvee Drive Belt - 1975 H7 for TCS374E - ES501196
View video

4.8 out of 5 Rated 4.8 out of 5(163 customers)

Genuine spare for select models of AEG, Electrolux, Zanker and Zanussi tumble dryers

Read more

Manufactured by Electrolux

(This part fits select Zanussi models)

Will this part fit my Appliance?

Yes

This part is compatible with Zanussi TCS374E Tumble Dryers.

Important: 91671550905

Not what you're looking for?
See all parts for your appliance.

Tumble Dryer Polyvee Drive Belt - 1975 H7

If your tumble dryer has lost its drive, perhaps eSpares can be of service. This genuine spare drive belt from Electrolux could be just the part you need to ensure things are moving in your dryer once again. You'll soon have dry clothes once again. 

Specification:

  • Type: Poly-vee belt
  • Section: H7
  • Size: 1975mm

 

Genuine spare part suitable for select models of AEG, Electrolux, Zanker and Zanussi tumble dryers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Please note: This spare is PNC number dependent. Please contact our Call Centre with the PNC/Product number from the data plate of your appliance so we can make sure this spare is suitable.

Write a review

Here’s what other people are saying about Zanussi Tumble Dryer Polyvee Drive Belt - 1975 H7 for TCS374E.

(163 reviews)

4.8 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 4 out of 5
  • Ely
    5.0 out of 5

    Belt fitted and operated perfectly

    The belt arrived promptly and was fitted with the help of the video from the excellent web site.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • Louth
    5.0 out of 5

    Amazing company!!!!!

    I cannot fault the service I received from this company and would not hesitate to recommend them. I would definitely use again if I needed anything . Communication second to none! Well done e spares!!!

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Somerset
    5.0 out of 5

    A very successful repair

    Bought the more expensive "genuine" belt out of caution not experience. Many instructions available on the web in addition to e-spares own. They offered alternatives of fitting the belt from the rear of the drum or the front. In our case front fitting proved easier and I was pleasantly surprised at how straightforward this was. The drum is very little weight and adequately supported on the rear bearing alone when tilted back to slip in the belt. Fitting on the motor shaft was simple because our machine has no fan on the end of the shaft. After re-connecting the motor tension spring the fit and alignment were perfect. Unusual to have a no problem repair and thanks to all who provided the web advice.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
See all reviews
Ask a Question

7 Questions and 7 Answers

i am trying to fit a belt model tc7103s belt type 1975H7 i have adjusted the tension wheel as much as i can and the belt is still too big for the drum has anyone else experienced this if so did you come up with a solution?

By andy1 - leeds - 02 January 2015
  • Chris from eSpares
    Chris at eSpares says...

    On this model a spring pulls the motor to apply tension to the belt. Take the spring off and return the motor fully round away from the spring to fit the belt on the correct side of the pulley. When the spring is refitted it will move the motor and tension the pulley.

Answer this question

Belts round the drum but where does it go on the wheels ?

By tydemneo - Warks - 17 October 2013
  • Chris from eSpares
    Chris at eSpares says...

    The hinges should be easy enough to replace. First lock the hinges and remove the door from the cooker, Then split the door by removing the front from the back and you will then be able to access the hinges to replace them.

Answer this question

Tricity Bendix,model MT320W belt order number 2814116

By Mac - Home - 03 March 2012
  • You may be able to alter the position of the tension wheel spring. I had to do this to take up the slack, bit fiddely but worked fine Paul By Paul - Wilts - 02 April 2012
Answer this question

Can you help me to fit a dryer belt on a zanussi dryer

By bell33 - london - 26 April 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Unfortunately we cannot provide fitting instructions for this spare. Please contact an engineer for support with this part.

Answer this question
By Anonymous - - 30 January 2010
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    Take a look through our advice centre, most common problems for tumble dryers are listed and explained on there.

Answer this question
See all questions and answers
Order within 12AM for UK Next Day Delivery