Electrolux Tumble Dryer Polyvee Drive Belt - 1975 H7

Stock Number: ES501196

Manufactured by Electrolux

In Stock Available for immediate despatch

Rated 4.8 out of 5 (139 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image


Tumble Dryer Polyvee Drive Belt - 1975 H7

If your tumble dryer has lost its drive, perhaps eSpares can be of service. This genuine spare drive belt from Electrolux could be just the part you need to ensure things are moving in your dryer once again. Manufactured from strong, hard-wearing material, you can be sure this belt will have you enjoying warm clothes again in no time.


  • Type: Poly-vee belt
  • Section: H7
  • Size: 1975mm
Genuine spare part suitable for select models of AEG, Electrolux, Zanker and Zanussi tumble dryers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.

Please note: This spare is PNC number dependent. Please contact our Call Centre with the PNC/Product number from the data sticker of your appliance so we can make sure this spare is suitable.

How to replace a tumble dryer belt

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.8 out of 5 (139 customers)
Write a review
  • Great service

    • 5.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5


    Arrived in a very short time received an email with in one hour of order and recieved it in good time Thanks
  • Well worth the DIY

    • 5.0 out of 5
    • 3.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5


    I ordered this as the belt on my AEG Lavatherm 56830 had snapped. The quality appears to be the same as the OE belt that lasted 12 years so we shall see. I would not suggest you take on the job of fitting this belt if you are not mechanically adept. The "How To" video on e spares is excellent but on my model to save removing the two piece back panels (and possibly ruin the gaskets) I found it easier to remove the front. Follow the video to remove the top and side panels, No need to remove the door, the two screws that hold the water tank housing on when removing the control panel are longer than the others and one holding the lower front panel is of a different type. Check that you have removed the correct screws, don't force anything. Be sure to chock the drum and the front will come forward enough to slip the belt between the front and the drum face. There is an earthing carbon brush housing under the drum to the left which you should in unclip and when replacing ensure is in contact with the drum(check the snail spring). The whole job took me less than an two hours but I could halve that if I did it again. Job Done, loads of money saved. Hooray for eSpares!
  • Tumble dryer belt renewal

    • 5.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5

    By - Stevenage

    A perfect fit once I worked out how to adjust the tension wheel

Ask & Answer

(6 Questions and 6 Answers) Ask a question
  • Q How to fit a belt on a proline TDC6A tumble dryer 1 Answer

    Belts round the drum but where does it go on the wheels ?

    By tydemneo - Warks - 17 October 2013

    • A
      The hinges should be easy enough to replace. First lock the hinges and remove the door from the cooker, Then split the door by removing the front from the back and you will then be able to access the hinges to replace them.

      By Chris eSpares Staff - 18 October 2013

  • Q Hi I have just tried to fit a drive belt to my tumble drier but it is to big and I see no way of adjusting it could you please help. 1 Answer

    Tricity Bendix,model MT320W belt order number 2814116

    By Mac - Home - 03 March 2012

    • A
      You may be able to alter the position of the tension wheel spring. I had to do this to take up the slack, bit fiddely but worked fine Paul

      By Paul - Wilts - 02 April 2012

  • Q fitting a Tumble Dryer Drive Belt 1 Answer

    Can you help me to fit a dryer belt on a zanussi dryer

    By bell33 - london - 26 April 2010

    • A
      Unfortunately we cannot provide fitting instructions for this spare. Please contact an engineer for support with this part.

      By eSparesMalindi eSpares Staff - 21 June 2010

  • Q where is the drive belt located on the drum of the tumble dryer 1 Answer

    By Anonymous - 30 January 2010

    • A
      Take a look through our advice centre, most common problems for tumble dryers are listed and explained on there.

      By eSparesToby eSpares Staff - 02 February 2010

  • Q drum belt slack 1 Answer

    ordered new belt for zanussi tumble dryer can you tell me please how to take up the slack tc7102w

    By belladog - 04 March 2009

    • A
      Hi Belladog, the belt must be fitted round both the drum and the clamping roller, which can be found here: http://www.espares.co.uk/part/tumble-dryers/electrolux/p/1088/15/0/0/629342/clamping-roller-assembly.html

      By Rory eSpares Staff - 23 April 2009