Caple Dishwasher Lower Door Seal for DI441 (854544115836)

Fits the following models [?]

Click on your brand to see the model numbers this part fits.

How to replace a dishwasher door seal

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

• Simples 05 January 2013

  • Overall Rating 5.0 out of 5
  • Ease of fitting 5.0 out of 5
  • Quality 5.0 out of 5
  • Value 5.0 out of 5

  By Dan - Brighton

  Simple ordering, fast delivery. I was fitting to a Diplomat ADP8332. The video wasn't much help in terms of the way to do it but follow the same theory and it's not too difficult to figure out. I removed the existing one and fitted this one, I had to slide in from one end and push through (washing up liquid for lubrication) and it fitted perfectly. It took a while but quite simple. Also did the upper door seal at the same time.

• Did the job - no more leaks 05 December 2012

  • Overall Rating 5.0 out of 5
  • Ease of fitting 3.0 out of 5
  • Quality 5.0 out of 5
  • Value 5.0 out of 5

  By loosedougie - Hertfordshire

  Arrived quick. Fairly simple to fit though would of been a lot easier if I could of been bothered to disconnect the springs from the door, but didn't want to move the dishwasher out from its position. Removing the door panels did show up that water had been getting behind the panels for a while. Hopefully problem resolved. Did the door seal at the same time, so unsure where the leak was coming from.

• Ignis dishwasher lower seal. 12 June 2012

  • Overall Rating 4.0 out of 5
  • Ease of fitting 2.0 out of 5
  • Quality 5.0 out of 5
  • Value 3.0 out of 5

  By Walmac - West Wales

  There was no guide to fitting on the Ignis but a video showed how to fit on another type. This was of help, however there was no need to unscrew the two hinges screws on each side as they did not effect fitting the seal. You have to take off the sides and door to access the seal. The seal was difficult to push into its slot but a little liquid soap helped ease it in.

Read all reviews...

• Q How do you fit the lower door seal to a Whirlpool ADG957/3? 1 Answer

  By JasonH - 10 February 2010

  • A

    Try following these instructions, should work out nicely! http://www.ehow.com/how_5653171_replace-whirlpool-dishwasher-seal.html

    By eSparesToby - 12 February 2010

  Answer this question