Zanussi Dishwasher Wheel Support

Stock Number: ES185033

Manufactured by Zanussi

In Stock Available for immediate despatch

Rated 4.7 out of 5 (163 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image


Dishwasher Wheel Support

Is a wheel support for your dishwasher looking past its best? Or have you somehow managed to damage it? No problem, eSpares may have just what you need. This genuine spare support from Zanussi could soon be fitted to ensure your old dishwasher is back on top form.
Genuine spare part suitable for select models of Zanussi, Electrolux and many more brands of dishwashers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.

More product images

Product Reviews

Rated 4.7 out of 5 (163 customers)
Write a review
  • Does exactly what it says

    • 5.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5
    • 3.0 out of 5


    I took the advice of some other reviewers and only fully undid one screw at a time -loosening the other allowed me to swing one end around while attaching the new set of wheels.
  • Useful replacement, a little tricky to fit

    • 4.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5
    • 3.0 out of 5

    By - Bolton

    The wheels on these supports gradually wear with use, and replacing makes the rack run much more easily. You will normally need a set of four, which makes the set a little expensive. I have an important tip to help with fitting. DON'T undo both screws at once. I did this and the sockets disappeared into the body of the washer! Instead, Loosen one screw but make sure it still catches the socket (the two sockets are connected inside the body), then remove the other screw and twist the old support to one side. Screw one side of the new support in a little way before completely removing the old one - three hands would help with this operation.
  • Does the job

    • 4.0 out of 5
    • 2.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5

    By - Charmouth

    Difficult to fit. Not fault of product. Machine design fault.

Ask & Answer

(1 Question and 5 Answers) Ask a question
  • Q How may do I need? 5 Answers

    Hi, Can you advise if this is a single pair of rollers or a multi pack. I need to replace all the ones on my Zanussi DW917, do I need to order 4 of these or just one?

    By ChrisB - 12 November 2008

    • A
      You need 4, like I did.

      By Alvin - Burnley - 24 May 2010

    • A
      I was replacing the wheel supports on an Electrolux dishwasher and I needed to order 4. Hope this helps.

      By frogdragon1 - Dublin - 20 May 2010

    • A
      There is one set per pack so you may need all 4

      By Anonymous - North Staffordshire - 30 March 2010

    • A
      Yes chris, Simply order 4 of them as one one support per packet

      By Sparky7168 - Mountmellick, Laois, Irel - 15 February 2010

    • A
      Hi Chrisb These wheel supports are sold separately so you will need have four in the quantity of your order to replace all of them in your dishwasher.

      By Rory eSpares Staff - 20 November 2008