Washing Machine Drum Bearing and Seal Kit

Stock Number: ES1020429

In Stock Available for immediate despatch

Rated 4.8 out of 5 (22 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image


If it's time to replace the bearings in your washer's drum this may be the kit for you. It is compatible with select Creda, Electra, English Electric, Gala, General Electric, Gornje, Hotpoint and Jackson washing machines.

Kit includes:

  • 1 x front bearing
  • 1 x rear bearing
  • 1 x bearing seal

This is a compatible spare suitable for the models in the listed appliances. 

How to replace washing machine bearings

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.8 out of 5 (22 customers)
Write a review
  • Cheaper than a new machine

    • 5.0 out of 5
    • 1.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5


    This was a replacement set of bearings for a washer dryer. I wondered how easy they would be to install but obviously a lot cheaper than a new machine. Before purchasing I watched the espares video which went through the process. This gave me the confidence to go ahead and have a go. The process was just as shown and the replacement was not difficult but takes a long time around 5 hours start to finish, you just about have to dismantle the whole machine on the kitchen floor. Access to a workshop with a bench would have made things easier. A bit of a leak was soon fixed by readjusting the door seal but now works and saves several hundred pounds.
  • Good quality product.

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Cornwall

    Not a 5 minute job, watch the video, get a big hammer!
  • Hotpoint Bearings

    • 5.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5

    By - Northumberland

    Hi, I recently ordered and recieved bearings for my hotpoint washing machine. They were delivered faster than I had anticipated were of good quality and correct for my machine. Fitting was described on a youtube link where it looked so easy. It was, however, make sure you where the correct PPE, gloves are a must as my hands look as thought I placed them in a shreader. Great service thank you very much.

Ask & Answer

(11 Questions and 11 Answers) Ask a question
  • Q Will this kit fit Hotpoint hv6f160? 1 Answer

    By sabka - doncaster - 29 December 2014

    • A
      The drum on your machine is not repairable as it is welded together and cannot be parted and re sealed after bearing replacement. It is likely to be cheaper to have a fixed price repair with Repaircare than replace the drum unit Stock Number: ES1130269

      By Chris eSpares Staff - 30 December 2014

  • Q Will this fit hot point WF 321 1 Answer

    By Glen - Port Talbot - 09 May 2014

    • A
      We think this machine uses a welded tub. If there are no screws around the middle of the drum it is not possible to separate and replace the bearings. You will need a complete tub Stock Number: ES865090.

      By Chris eSpares Staff - 12 May 2014

  • Q my machine 1 Answer

    my washing machine is a hotpoint electronic 1000 plus 9534 i want to know what the diameter of the outside bearings and the inside bearings please?

    By Anonymous - dundee - 09 September 2010

    • A
      The front bearing size is 6205 the rear bearing next to the pulley is 6204

      By pells - 16 July 2012

  • Q Help!! Will this bearing set fit the hotpoint washing machine WMA62? 1 Answer

    By Onthegoose - 28 July 2009

    • A
      This bearing kit is not listed for that model. Please check your full model details and then contact us back to help you find the correct bearing kit. For information on finding your model details, please use the following link: http://www.espares.co.uk/findingmodelnumbers.aspx

      By eSparesMalindi eSpares Staff - 03 June 2010

  • Q will these fit a hotpoint wm22? 1 Answer

    By DavieG - 29 June 2009

    • A
      Hi Davieg, the bearing kit for the WM22 is this one: http://www.espares.co.uk/part/washing-machines/p/1085/0/0/0/1020429/washing-machine-drum-bear.html

      By Rory eSpares Staff - 03 July 2009