Dishwasher Timer PCB Stock Number: ES871108
Genuine spare part for select Hotpoint & Indesit dishwashers
Manufactured by Indesit
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Timer PCB
If your dishwasher is refusing to function due to a faulty timre module; then look no further as eSpares may just have the spare part for you.
The printed circuit board is the brains behind your dishwasher, this particular piece of the puzzle controls the timer functions. Replacing a faulty PCB could have your dishwasher running like new again.
Specification:
- Type: BIT 100 E4 ROH S
This is a Genuine spare part for select Hotpoint & Indesit dishwashers.
Please note, this part is SERIAL Number Dependant (From Serial number: 41011.0001)
This is Indesit spares reference: C00143209
4 Questions and 3 Answers
The "engineer" came and tells me that the circuit board is faulty. The dishwasher does not heat the water but everything else is ok. He says the heater and thermostst are ok. The only circuit board I can see is called the timer. Is there any other circuit board? I have looked at the board and it does look as though one of the parts has overheated and partly melted the solder. Would the fault that caused this be confined to the circuit board or does it indicate a fault elsewhere?
- When I dismantled front of my dishwasher I didnt see any other circuit boards. This has to be the part you need 10 mins to fit. Cheaper than engineer
- Had the same problem. Also check pressure switch if OK the fault most likely to be with Timer Board. Replacement Timer Board fixed my problem.
the crt board on my dishwasher has set on fire and completely burnt out, is it worth replacing or will there be any damage to anything else, what could of caused this 1 Answer
area of damage, top left of board, as you look at the diagram
-
Rory at eSpares says...
Hi eddo, it's a bit scary that it set on fire! Before attempting any repairs I'd ask an electrician to take a look to see if it is still fit for use; these boards should definitely not be setting on fire.
My Dishwasher will only operate on cycle no. 4 ie. rapid 25. will a timer, (circuit board), solve this problem?) 0 Answers
None of the other 4 selections on the rotary switch will operate the diswasher ie. No. 1. Intensive, No. 2. Time for you, No.3 Eco, No. 5 Soak
Will this part fit my appliance?
Check Now