Sub total: £0.00
Call 0844 9777 888
(7p per min + any network access charge)
Compatible spare for all cooker hoods with a 5 inch diameter connection
Rated 4.2 out of 5 by 21 customers
We bought the kit to use with our new Indesit hood. The kit instructions are easy to follow and the elements that make up the full kit are good quality. Very pleased with the result extraction working very well.
This did exactly what I wanted, out of the extractor, straight through the wall. Every part I needed was in the box, what more could I have wanted
express delivery, good service, packaging v.good looks ok and good value,yet to be fitted but my fitter says it's right one.good company to deal with , will use again if need arises
Fast delivery and good quality product. Was exactly what I needed and easy to fit.
Easy fitting and has been working well in our new sandwich bar and noise level low
The product was as advertised and the delivery was prompt and I was kept abreast at all times of the whereabouts of the package.
I was amazed at how fast the product was sent and how much I saved (50%) in ordering online than purchasing from the local outlet
This kit is partly OK but needs a bit more development. I've ended up glueing and clamping the flexi tube to the external vent and even with that there was not really sufficient thickness of material around the hole through the wall to satisfactorily drill, plug and screw the vent plate to the wall. Was I advised to bore a 150mm / 6inch hole/ ? Had I bored a 150mm hole then the vent plate would have had no means of attachment as it's not big enough for the fixing screws to be outside the bored hole!. This kit is OK ish as an amateur prototype but should not be on the market in its present state. Still, I'm happy to have managed to install it as the extractor does now vent smells and vapours to the outside. What is the point of them if they do not?
Despite this being the kit, and the source of the kit, suggested by the supplier of my new extractor hood, the size of the kit meant that fitting was a more complex process than it needed to be. The guy fitting my new kitchen explained that he could not use a standard bit to make the hole for the hose, because the size and diameter meant that a standard drill bit would be a couple of mm too small. He was able to work around this, but I would suggest that if someone was trying to fit this themselves, they might struggle.
Purchased this for Neff 2654XOGB cooker hood. The kitchen fitter had no trouble fitting it and it, and the hood, extract better than any other extractor fan I have ever used. e spares were very efficient as well so top marks all round.
Based on the average of 2 ratings-only reviews