Sub total: £0.00
Call 0844 9777 888
(7p per min + any network access charge)
Universal oven door seal for select cookers with rounded corners
Rated 4.2 out of 5 by 121 customers
Bought two sets for the top and bottom doors of our Cannon gas stove. The seals were easy to fit and worked super for the top oven but unfortunately the extra bulk of the new seals compared to the old ones has resulted in the bottom oven door catch not being strong enough to keep the door closed. Replacing the door catch is my next job but it is the female part in the main body of the cooker that has gone and that looks like a long difficult job. One word of warning when fixing the corner fixings in the seal, make sure the seal is not twisted because once you have inserted the corner fixings you cannot remove them - check then check again before inserting corner fixings. Easy to complete in less than 30 minutes.
This is awkward to fit and is no use for my oven ☹️
The item was well made, functional and the instructions easy to follow. Saved me £££'s
The door seal is of good quality, came with easy to understand instructions and was cut to size and installed in about 10 minutes.
Bought this for a basic siemens oven. Made sure it was the correct product as per the model number. The connectors for the rubber seal were not adequate and compared to the original fitting were inferior quality. I had to remove and utilise the old metal fittings. So basically paid for the rubber seal. Would not purchase again.
I have a Hotpoint HUE52P cooker and wherever I tried the seal for this cooker was out of stock. I therefore purchased this one. I was very disappointed .It is not universal for all cookers.The metal hooks that go into the holes are just not long enough. They just do not go into the holes . After a long time trying to get them to fit I gave up. I then decided to try the metal corners in the original seal that had split in half as the hooks that goes into the hole is a lot longer. I was able to get the new metal corners out of the new seal by very carefully turning each of the 4 seals whilst holding on to the metal corner. They did come out without any damage to the seal. I think if I had tried to pull them out I would have split the new seal. I used the old metal corners in the new seal. Hopefully it will hold on until I can get the proper seal from Hotpoint. I can only give only 1 star for each of the ratings . However I was pleased with the ease of ordering and how quick the item was delivered.
Easy to fit and a well made product. Could not find an original replacement on line so tried to find a kit that would fit. Excellent.
Easy to assemble and fit to our oven does the job perfectly.
ordered 2 door seals for our range unit - arrived before scheduled date - easy to fit -just remember to heat up ovens after fitting to allow the smell of the rubber to go
Arrived quickly, everything worked OK, fitted together easily. The hooks fitted the holes where the previous seal fitted. So far so good.
The only problem was that the oven door would not shut after everything was in place. The rubber seals are too thick for my oven. Solved by cutting the top 1mm off the top of the new seals with a pair of kitchen scissors, and all OK.