Sub total: £0.00
Call 0844 9777 888
(7p per min + any network access charge)
Permits connection between two outlet water hoses
Rated 3.4 out of 5 by 9 customers
Bought this after asking your internet helpline, as I needed to extend the drain hose because of moving the machine. Advice was that this is what I needed - only when I received the extension hose (ordered at the same time) it already included this connector! But at least now I have a spare, and it didn't cost much....
I bought a connector to fit 21mm hose AND one to fit 22mm hose but they were both the same and too small to create a seal. I needed to put sealant around both ends and use two jubilee clips to create a waterproof seal. (Zanussi washing machine)
Perfect fit for my LG washing machine, good quality part and easy to fit. Used a couple of hose clips to be sure of a good seal.
No problems with this item. It joined the ends of the hose with just a firm push fit.
A nightmare to fit. This fitting does NOT fit a standard type hose. Significant heating of the pipe was required which stretched the hose and resulted in more leaks. In short - a waste of time and money.
The connector was a very tight fit in the drain hose of my Hotpoint Dishwasher. It was extremely difficult to push the hose far enough onto the connector. Eventually applying heat with a hair dryer did the trick.
THIS HOSE CONNECTION FOR THE DISHWASHER WAS THE WRONG SIZE THE SIZE WAS A 17MM
The product is no use to me because it is the wrong size. It would have been more help to advertise the size of the drain hose that it is connecting rather than the size of the connector itself.
I'm solving the problem in another way, but I'm not so very pleased about this.
Based on the average of 1 ratings-only reviews