Cooker Hood Carbon Filter Stock Number: ES875046
Compatible spare part for select models of Hygena, Matsui and Schreiber extractor fans
I have an Hygena cooker hood extrator fan that does not go outside but i have 2 numbers APM 2211 and APP 2300 can you please tell me which filter i need?
-
Rory at eSpares says...
Hi Thomas36, these are two different models, I'm perplexed as to why you have both numbers! I'm afraid I can't help much more than to say that if it is an APP2300 then this is the filter you're after, or if it's an APM2211 then this is the one you're after: http://www.espares.co.uk/part/cooker-hoods/hygena/p/1091/1037/0/0/1029695/cooker-hood-single-carbon.html
- APM2211
Will this fit my Diplomat Elite hood, Model ABA2342. The filter is 210mm diameter, 30mmdeep 2 Answers
- It is 210mm x 30mm, provided the one your looking looks like the picture [2 lugs and solid face] then it should be ok
-
Rory at eSpares says...
Hi Satan916, unfortunately we don't stock filters for your hoods, sorry.
I am asking this because my hood is over 20 years old and I have forgotten where and what it is I did not know that you could replace this part and have been yusing the original!!!!!
- appl2110 ithink it is 8ins round if that iis any help
-
Rory at eSpares says...
Hi Retro60, if I could have your hood's model number, I can tell you if this filter will be suitable for you.
-
Chris at eSpares says...
In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
It looks right with the two fixing lugs each side and is the right 210 diam.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
I don't know make of extractor. I bought it with kitchen from MFI 2005.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
fitted extractor 1 month ago fitted carbon filter used twice and notice black dust all over hob and a black film over ALL my cupboard carbon had all broken up so fitted the spare filter now that is doing ths same. 1 Answer
The hood and filters came from howdens
-
Chris at eSpares says...
Take out a carbon filter and use a vacuum cleaner with a white tissue over the tip to draw air through the filter. If the tissue 'greys' it suggests charcoal dust is escaping the filter. Use the vacuum to draw loose dust out of the filter and replace if required. There may be a little loose dust when a filter is replaced, a light vacuum may remove this.
- Twist the filter a couple of inches clockwise ?. locate the new filter in the two holes and twist clockwise ? until the filter locks
-
eSparesMalindi at eSpares says...
Your model number does not come up on our system. Please re-check your model details and contact us back. Hopefully this link helps: http://www.espares.co.uk/findingmodelnumbers.aspx
Will this part fit my appliance?
Check Now