Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Universal Cooker Hood Vent Kit Stock Number: ES509971

Compatible spare for all cooker hoods with a 5 inch diameter connection

Product Q&A

Ask a Question
By TMV - - 21 November 2018
  • Parminder from eSpares
    Parminder at eSpares says...

    We believe this should be suitable.

Answer this question

Where can i get a kit for the 5 inch vent hose to connnect to a 4 inch vent hose ?

By jph - - 01 February 2018
  • Chris from eSpares
    Chris at eSpares says...

    Stock Number ES1554678 will adapt 5 inch to 4 inch hoses.

Answer this question
By Brian Thomas - Woodcote,Reading - 01 January 2018
  • Chris from eSpares
    Chris at eSpares says...

    You may need a 'connecting piece' to join the pipes or buy one kit and one 4 metre hose Stock Number ES510012

Answer this question
By Roger Slack - Feniton Devon - 10 July 2017
  • Dean from eSpares
    Dean at eSpares says...

    This item comes with fitting instructions included.

Answer this question
By ICI - Stourport-On-Severn - 20 June 2017
  • Chris from eSpares
    Chris at eSpares says...

    This is suitable for cooker hoods that have a 125 mm (5 inch) diameter venting connection.

Answer this question

I think it does but I want to make sure. Also I think I shall need the longer hose - part ES510012. Thanks very much

By Neil Mellor - SHOREHAM-BY-SEA - 01 August 2016
  • Chris from eSpares
    Chris at eSpares says...

    Your hood will need a spigot that accepts a 125 mm (5 inch ) hose, if you do not have this you will need to order it for your cooker hood

Answer this question
By Julz - - 19 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    If your cooker hood has a 5 inch (125 mm) spigot to attach the hose this kit should be suitable for it.

Answer this question

"Extraction kit" 1 Answer

Hi there, I have ordered a Logik cooker hood with installation from an online store. The product description says "Extraction (kit sold separately)", but unfortunately this kit is not available from that company. Please can I check that the 'vent kit' you sell is an extraction kit, or are they two different products? I want to make sure I buy the right product before the installers arrive! Thanks

By Umbrella - Manchester - 18 January 2015
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

the hole in the wall is 100mm 4inch. the new extractor fan is 120 mm 5inch Is there a kit that will convert it. Thank you.

By Nanny Ogg - Mansfield - 02 June 2014
  • Chris from eSpares
    Chris at eSpares says...

    See our part Stock Number: ES1554678

Answer this question
By paulr65 - - 21 August 2009
  • We also bought this kit to cut down on condensation. Our hood is not on an external wall so I only needed certain items from the kit. As we are in a bungalow we took a (new) longer vent pipe into the roof space and then out through a soffit grille. As it's only just been fitted, it's too early to say whether it will be effective. It may be that our vent pipe is too long to work well. The main issue with the universal fitting is that it didn't fit our Neff hood particularly well and some degree of improvisation (and gaffer tape) was required. I'd suggest looking for a specific branded version if one is available but this kit should do the job if you can't find anything else. By MrBodgeit - Chester - 01 November 2009
Answer this question