Ariston Tumble Dryer Vent Hose - 3m for A35VEX Stock Number: ES503440
High quality vent hose for all models of tumble dryers that require a vent hose with a diameter of 10.2cm
Does this hose just fit in the hole at back of dryer or do I need a connecting part if so how do I get this part 3 Answers
- That answer is wrong! 'As the hose connect's to a plastic fitting'.Which is then pushed on to the outlet hole,Then locked into place,with a clockwork turn.
-
eSparesMalindi at eSpares says...
Please check the dimensions of your connection to make sure this part will fit your appliance. The diameter listed is 10.2cm (4 inches). Should you require further assistance if this part is not suitable for your appliance, please contact our sales team.
- It fits exactly on the back of your dryer and there is no connecting part required. Hope this helps.
We have a white knight tumble dryer where the hose fittings( plastic bracket) on each end have cracked, can we get the end pieces replaced, or do they come attached to the hose?
- Every dryer has the connexion piece attached to the dryer. The new hose is threaded into the connexion. It could be some people throw this connexion piece away when the dispose of the old hose
- Don't know where you can buy them but they don't come attached to the hose.
- No the hose comes on its own. I don't know if you can get the hose fittings seperately.
- Will the house fit into a front vented dryer?
-
Chris at eSpares says...
This will fit any dryer that has a 100mm / 4 inch hose connection
WE HAVE A C44A7W AND THE CURRENT HOSE IS NOT LONG ENOUGH, AND WE WANT TO ADD ANOTHER 3 METRES. DO WE NEED AN ADAPTOR?
- Try the three metre one first, I bought an adapter to join two together (not from eSpares as I didn't know they did one) but found a three metre hose was long enough anyway.
-
Chris at eSpares says...
You will need a connector Stock Number: ES503452.
I have a white k knight model CL847 HA030335603 approx 7 years old. How does the 3 metre universal vent hose fit please? 2 Answers
- pull out old one i had to cut mine and slot new one in easy to do
-
Rory at eSpares says...
Hi Shaucepan, the hose simply 'stretches' round the mounted vent on your dryer.
-
eSpares Staff at eSpares says...
There should be an access panel at the back located at the bottom of the dryer, you can unscrew it to gain access to the hose that connects to banjo assembly.
I bought a vent hose elsewhere and the wire spiralled the wrong way meaning it could not be threaded into the plastic attachment to fit onto tumble dryer
-
Chris at eSpares says...
This is a standard dryer hose and will fit all UK appliances.
Indesit IDV75 keeps cutting out, is this due to vent tube getting squashed?
-
Dean at eSpares says...
If the vent hose is being restricted due to the way it is being vented, it is likely to cause air flow problems causing the dryer to cut out. Check the dryer is not blocked inside and test the thermostats to ensure they are working correctly.
How do you remove vent hose from back of hot point Aquarious VTD00P tumble drier
-
Chris at eSpares says...
The hose should just unscrew from the adapter ES802589.
-
Chris at eSpares says...
This hose can replace your existing hose providing you have the connecting adapter on the old hose. If not you will require Stock Number ES185984