Get The App From Play Store!

Skip to main content

Bosch Dishwasher Lower Door Seal for SGS5682EU/20 Stock Number: ES502822

Genuine spare part for select Bosch, Neff, and Siemens dishwashers

Product Q&A

Ask a Question

The lower door seal arrived from espares today. Order number 4944265

By Anonymous - - 21 November 2014
  • I've just successfully changed the Lower Door Seal on our dishwasher - getting the top off was the most challenging part! You should also make careful notes of the screw types – fine threaded to go into metal and coarse threaded (like wood screws) to go into plastic. Seems like the fixings for the top have changed over the years. Our machine is from 2008 and has two 'wood' screws at the front and one (of three possible) 'metal' screws at the back – you need to undo all of these first. At the front the top has two big plastic blocks with locking lugs – you can see the lugs down little tunnels facing you. Use a screwdriver to push each lug back which will allow you to pull the top up at the front. At the back the top has two lugs sticking through the rear metal panel. Tug the top forwards to release it from these lugs. Hope this works for you By Andrew R - Hook - 12 January 2020
  • Close the door. Pull the clip down slightly and lever out sideways By M S - west midlands - 20 June 2016
  • Chris from eSpares
    Chris at eSpares says...

    The lid on most Bosch dishwashers slides and locks in place. We think that at the back there is a clip either side moulded into the top that needs to be released to prevent locking the lid in place.

Answer this question

should the lower grey tray have a convex bend along there lip running left to right, this is the lip that the seal is attached to. It bends outwards slightly towards the middle. I have photos which I can send showing the problem.

By Geoff - Edinburgh - 09 January 2020
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    The only time it needs to be replaced is because the dishwasher is leaking from the seal or the door does not close correctly due to the tray catching.

Answer this question

Model SGS4332GB17

By Ian - UK - 09 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    The covers Stock Number: ES731804 have clips that hold them in place and we think they have to be twisted to unhook and remove them.

Answer this question
By Derek - Littlehampton - 29 November 2013
  • Chris from eSpares
    Chris at eSpares says...

    We have now changed the video attached to this part to the correct one showing this repair.

Answer this question
By Derek - Littlehampton - 29 November 2013
  • Chris from eSpares
    Chris at eSpares says...

    We are sorry but the video attached to the part is the closest video we have for this repair.

Answer this question

I have just changed the lower door seal which took about 2hrs. Your video was very helpful but I initially had problems trying to actually fit the seal to the rim of the dishwasher towards the end. It turned out being less complicated than I thought. The whole dishwasher toppled forward quite a bit at one point and I wondered whether this has pulled the water pipe too much and therefore caused the tap symbol to come up and therefore no water to come through.

By Simon - Cranleigh, Surrey - 29 March 2012
  • make sure you have turned on water at the back of machine you must have tuned off to do job maybe forgot to turn back on , if not check you havent trapped or pulled wires making bad connection whilst trying to do job By mo - essex - 02 May 2012
Answer this question

Hi I have viewed the video on how to change the bottom seal on a Bosch dishwasher, which looks very detailed and easy to follow. The problem I have is my dishwasher is integrated so what do i need to do to remove the dishwasher from the housing and what should I look out for such as cables, hoses falling off etc? Many thanks

By Norman - London - 18 March 2011
Answer this question

Will this part fit my appliance?

Check Now

Dishwasher Lower Door Seal

£44.37
(inc. VAT)
£44.37