Creda Tumble Dryer Thermostat Kit Stock Number: ES487865
Genuine spare part for select Ariston, Creda, Crusader, Electra, Hotpoint, Indesit, Jackson and Proline tumble dryers
i have Hotpoint TC71N needs new thermostats ...but no idea how to find date code ... description says IMPORTANT 64 or 65
- After phoning you I discovered that the date code is the first 2 characters of the serial number, in my case 78101179. This makes mine 78 which is later than 64/65 so the parts should be OK. The serial number is inside the drum on the left.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
The drier stops after running for a few minutes and you have to wait before it will start again. What parts do I need
- sounds like the starter relay needs to be replaced this might work but ask a spares part man frist cause they will cost you about £35 so ask 1st
-
Rory at eSpares says...
Hi Duggles, it sounds as if you need to give the condenser box a clean. Check out the last question on this page for help: http://www.letsfixit.co.uk/html/tumble_dryer_faq.html
-
eSpares Staff at eSpares says...
The photos show that the 130 degrees stat is the one with a green spot on it.
I fitted new thermostats and heating element and my Creda tumble drier still isn’t heating up 1 Answer
-
eSpares Staff at eSpares says...
For more help see our advice centre articles www.espares.co.uk/advice/symptom/tumble-dryer-not-heating-up just copy and paste into your browser.
replacement thermostats have green and yellow dots on them - originals are blue and white how do they match up colour wise? 1 Answer
-
Dean at eSpares says...
The thermostat with the green spot has a raised part between the two connectors that will be the same as the original.
In the thermostat kit, one thermostat has a yellow spot, and one a green spot. How do I know which is which, and where are they to be placed. There were no spots on the original thermostats. 1 Answer
-
Chris at eSpares says...
In this kit the safety stat has the green spot and will match the thermostat with a raised part between the two connectors.
THANKS
-
Chris at eSpares says...
The thermostat with the indicator is normally connected to the blue wires.
Is there a way of cleaning the thermostat on Hotpoint condenser TDC32N without replacing it 1 Answer
-
Dean at eSpares says...
Cleaning the thermostat will not usually affect whether it is faulty or not.
Fitted new heating element and thermostats to drier (hot point tcm65a) and all working fine initially. Now blowing cold air again. Ideas? 1 Answer
-
Chris at eSpares says...
If stopped when hot the thermal cut out will fail, you must ensure the machine is allowed to finish a cycle or it will cause the cut out to fail.
My creda advance condenser dryer is blowing cold air,how do I know if I need a thermostat or heating element? Thanks 1 Answer
-
Chris at eSpares says...
If there is no sign of damage to the heater it is likely the thermostat has failed. This could be checked with a meter like: Stock Number ES1741061 for continuity.
Will this part fit my appliance?
Check Now