300 Degree Oven/Microwave Lamp Stock Number: ES486678
Spare part for all cookers and microwaves that require a 25W E14 lamp
existing lamps 125 volt at 30 watts oven uses a pair wired to consume 250 volt. do you stock ?
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
first time it has gone since 1984
-
Chris at eSpares says...
If there is a inspection panel remove it to access the lamp. We do not advise if you have to remove the cabinet as this could expose lethal high voltages.
-
Chris at eSpares says...
To replace a lamp in most microwaves it is usually necessary to remove the cabinet top for access. As this may then allow you to accidently contact the high voltage side of the microwave and this could easily prove lethal we do not give any information for repairs of this nature.
I have a panasonic combination microwave model No NNA753W the bulb has gone everything else is working OK, do i need to remove the cover to replace bulb or should it be done by a trained person?. Thank you 1 Answer
-
Chris at eSpares says...
To replace bulbs in most microwaves you would have to remove the cabinet, this could allow you to accidentally come into contact with the high voltage that is used to power the microwave. This could easily prove to be fatal and for this reason eSpares recommend that you do not remove the case unless you have been trained to work on microwaves.
-
Chris at eSpares says...
To replace bulbs in most microwaves you would have to remove the cabinet, this could allow you to accidentally come into contact with the high voltage that is used to power the microwave. This could easily prove to be fatal and for this reason eSpares recommend that you do not remove the case unless you have been trained to work on microwaves.
How do I replace the microwave bulb for my Panasonic NN-C897W? Can't seem to from the inside, do I have to take the outside cover right off? Or is there knack? 1 Answer
The bulb, if it is the bulb, I see when I take off the internal cover is nothing like your illustration. It sounds daft but it appears to be pink and face away from the oven interior towards the exterior cover!
-
Christopher at eSpares says...
The manufacturers instruction book says 'The oven lamp must be replaced by a service technician trained by the manufacturers'. This is likely to require the removal of the case and expose the very dangerous high voltage area. As there is the real risk of death if this was accidentally touched we recommend you do not attempt this repair yourself.
Tried everyyhing but no luck
-
Rory at eSpares says...
Hi haswell53, getting to the bulb will depend on whether it's your oven or your microwave that the bulb is situated in! However, in either appliance it will entail removing the bulb cover. This will involve either removing screws from it, unthreading it or using a blunt object to lever it off.