Get The App From Play Store!

Skip to main content

Ariston Washing Machine Drum Paddle Stock Number: ES186730

Genuine spare part for select models of Indesit and Hotpoint washing machines

Product Q&A

Ask a Question
By cllyjo - - 07 February 2010
  • I was told a bra wire can do this or a 50p. By LKH - Leeds - 16 January 2017
  • Going to be a bit late with this answer I think but when it happened to my machine it was an Allen Key swirling about at the back of the drum that was shearing off the plastic clips that hold the paddles in place! By asheriff - Edinburgh - 12 October 2011
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Sorry we don't diagnose faults, only replace the spare parts. Should you need technical assistance, please speak to an engineer.

Answer this question

I have tried fitting replacements but there is a metal piece in the centre that when upright prevents the paddles from sliding/cliping into place. If I bend this piece down and flush with the drum then the paddles slide/clip perfectly into place, however when I use the machine the paddles are not held securely and snap off (again!). I now need to order more of these but need to know how I get them to hold in place after fitting - i.e. how do I get the metal piece in position to hold them?

By Tra77 - - 02 August 2010
  • I used a short length of thin string to lift the metal tab back up after fitting the paddle. Before fitting I bent the tab flush with the drum. I then looped the string around the tab (no knots) and fed the loose ends through a hole in the paddle. The paddle was pushed into place and then gripping both ends of the string I pulled the tab back up. The string was then removed by pulling one loose end. By secret mile muncher - Denbighshire - 08 October 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    We do have a help video for fitting this part but cannot advise beyond this unfortunately. If you require further assistance please contact an engineer for fitting this part. http://www.espares.co.uk/advice/washing-machines/a/7/1270/how-to-fit-a-washing-machine-drum-paddle.html

Answer this question

Could you please state somewhere that your instructional video does not relate to 12 hole paddle where the metal tab is below the 6th hole (not the 3rd)

By MBR - UK - 12 June 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    Thank you for providing the information regarding our video.

Answer this question

Drum paddles snapped yesterday then I put a wash on without them it fills with water spins a bit but if it stops where they have snapped it can't get going again

By Julie - Liverpool - 16 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    Small plastic bits may have washed into the pump preventing it turning. See our video: How to diagnose washing machine drain and pump problems: www.espares.co.uk/advice/7/1732

Answer this question

I received the paddle I ordered for my Hotpoint washing machine very promptly. We have looked at your video how to remove and fit new paddle, but we are unable to remove the broken one. Help!!!

By VJ - North Wales - 01 July 2015
  • Chris from eSpares
    Chris at eSpares says...

    The paddle is prevented from accidently coming off by the metal 'spring or flap' on the drum shown here: https://youtu.be/V-kIP83a4RU?t=49s this will stop the paddle from being removed until it is pushed down enough to clear the paddle.

Answer this question
By salj03 - - 27 July 2010
  • My model number is different but if fitting is the same you place the paddles over the grooves in the drum then push forward or back into the narrow section of the grooves and the paddles are secure quite literally a minutes job. By tapper - West Midlands - 05 August 2010
Answer this question

wf561puk washing machine paddle has a hole in it but i cant work out how it comes off to fit the new one i have just ordered, any suggestions.

By waveyd - hull - 24 August 2009
  • It should just slide towards you. It may be a bit stuck as they are tight fitting but it will slide towards you with a bit of effort then the new one simply slides back onto the metal slots. Hope this helps. By workjagwoman - Carlisle - 03 November 2009
Answer this question

I have an Ariston AMLG 101 (Washer/dryer). Will this drum paddle fit my machine??? thanks,

By vals - - 07 July 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Vals, I'm afraid I can't match your model number in our washing machine or tumble dryer databases. Would it be possible to double check? For help locating it, use our guide: http://www.espares.co.uk/findingmodelnumbers.aspx#a7

Answer this question

i have a paddle the same spec but different in size. can you advise me the number for a paddle 186mm full length.

By MrTurner - - 27 April 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Mrturner, there's a lot of paddles that are 186mm long - I'll need your machine's model number to find you the right one. For help locating it, use our guide: http://www.espares.co.uk/findingmodelnumbers.aspx#a7

Answer this question

I have an INDESIT WASHING MACHINE - MODEL NO.WIXL 163 S. Could you tell me if you have a washing machine drum paddle to fit this type of washer, please?

By lush - - 04 February 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Lush, this paddle will fit your machine.

Answer this question

Will this part fit my appliance?

Check Now