Over 4 million customers served
UK based customer service team
Wellco Heat Powered Stove Fan - Black / Nickel Stock Number: ES1680782
The F601 Stove Fan will make your stove more cost-effective, and provide even heat distribution
-
Chris at eSpares says...
We believe there is a small Allan key type grub screw that fixed the fan on the motor spindle.
I should think it must be quite noisy when the fan is working.
-
Chris at eSpares says...
It is very quiet (lower noise than a desk fan)
-
Chris at eSpares says...
This will work on any hot flat surface so would work on a cooker hotplate or a hot surface on the heater.
Does this fit hunter wood burners and if so where do you put it. Behind burner on the outside? 1 Answer
-
Chris at eSpares says...
We have no specific information on woodburners. This fan will stand on any flat heated surface and convert the heat to electricity and power the fan.
Where does it need to be sited? i.e. it can't go on top of our wood burner because it has a sloping top. So will it work if placed alongside (left or right), above and behind or what do you suggest?
-
Chris at eSpares says...
This should stand on a flat top on the oven directly to receive the heat through the base to power the fan. it may work also on a gentle slope ie 10%
Never seen one of these... What stoves will it fit, (or how best do you fit it to an existing stove) and how big is it? Thanks
-
Chris at eSpares says...
This free stands on any hot surface. Dimensions: 210 mm High, 130 mm Wide, 80 mm Deep, 205 mm Fan Width.
-
Chris at eSpares says...
Dimensions: 210 mm High, 130 mm Wide, 80 mm Deep, 205 mm Fan Width.
-
Chris at eSpares says...
This only works by using the heat transfer through the base plate being of higher temperature than the finned top section. Unless there is a significant temperature difference there will be no motor power.
