Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Universal Multifit Cooker Control Knob - Silver Stock Number: ES1667291

Universal control knob for most cookers and hobs

Product Q&A

Ask a Question
By FW - Kent - 29 April 2016
  • I cannot understand if this universal could be used, so how come it does not match either you can use it or it does not fit. Mind you we are dealing with gas so we have to be safe . By ANTON GREGORY - MALTA - 21 July 2016
  • Chris from eSpares
    Chris at eSpares says...

    The correct knob for your hob is Stock Number: ES1094173 This universal could be used but will not match.

Answer this question
By Sarah - - 11 July 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    You would normally use the spring from the old knob when replacing it.

Answer this question
By Sally Johnson - - 07 June 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    If you had ignition before it suggests it's something you have done during replacement but check the ignition switch to make sure it has not failed.

Answer this question
By T. A. Hine - BH316bx - 18 January 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    you will receive 3 different size spindles to fit a range of machines and please watch the video for more information on fitting www.youtube.com/watch?v=0bhkYf1DiJ0 just copy and paste into your browser.

Answer this question

My old order number was 4302982. I bought an oven knob and a hob knob. Part numbers were...STVO82625731 and STVO82875103 . This is in 2014 . Now I want 4 silver HOB knobs. Thanks

By Anna Scruby - South Wales - 25 April 2017
  • Dean from eSpares
    Dean at eSpares says...

    This universal control knob is silver in colour and also comes with 3 different sized spindles to help you fit it to your cooker/hob.

Answer this question
By Bob Hall - isle of wight - 11 February 2017
  • Chris from eSpares
    Chris at eSpares says...

    These knobs do not have an adapter for 8mm shafts but the 6mm adapter could possibly be filed open to accept this larger size or you could make an an adapter using a filler.

Answer this question
By BH - Essex - 24 August 2016
  • Chris from eSpares
    Chris at eSpares says...

    The large adapters are 30 mm long and can accept 'D' shafts of 3.9mm, 4mm, 6mm and round 4 mm shafts. However part of this goes into the knob so it is recommended the control shaft should not be more than 7mm below the surface.

Answer this question
By V Oreilly - - 28 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    These knobs should be a suitable alternative.

Answer this question
By Hah - Shrewsbury - 22 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    These knobs can fit most models but we do not have a list of appliances they are confirmed suitable for.

Answer this question
By Irene - Surrey - 13 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    The correct knob should be Stock Number: ES1560275 but this one is also likely to fit.

Answer this question