Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Universal Multifit Cooker Control Knob - Black Stock Number: ES1635532

Compatible black control knob for use with all cookers & hobs

Product Q&A

Ask a Question
By paul - cardiff - 30 May 2015
  • Chris from eSpares
    Chris at eSpares says...

    This could be used to replace Stock Number: ES1330086 but will look cosmetically different to the original.

Answer this question
By Mr A F Graveley - Umberleigh, Devon - 03 May 2015
  • Chris from eSpares
    Chris at eSpares says...

    This will fit most variable controls that use a 5 mm diameter circular shaft with a flat on one side.

Answer this question
By Grace - Kettering - 21 April 2015
  • Chris from eSpares
    Chris at eSpares says...

    This part could be used but the correct part for your oven is Stock Number: ES1330086

Answer this question
By Sobia mustafa - - 06 April 2015
  • Chris from eSpares
    Chris at eSpares says...

    No. That would be specific to the original control knob. In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

Compatability 1 Answer

Will these knobs fit model No 444445412 Belling Country Range Duel Fuel Cooker?

By Tomred - Cheshire - 09 February 2015
  • Chris from eSpares
    Chris at eSpares says...

    These knobs can be used for most appliances but the original knobs are available by following this link: http://www.espares.co.uk/search?SearchTerm=444445412%20knob

Answer this question

The images for both look identical. are they the same diameter?

By Joey Jones - Belfast - 20 November 2014
  • Chris from eSpares
    Chris at eSpares says...

    Universal Multifit Oven Control Knob” (Stock Number: ES1633593) is duplicated and will be shortly removed.

Answer this question
By Anonymous - Wales - 10 February 2014
  • Chris from eSpares
    Chris at eSpares says...

    Yes they are plastic.

Answer this question
By Marcus Welby - Daventry - 08 February 2014
  • Chris from eSpares
    Chris at eSpares says...

    As long as the timer has a shaft that can be adapted by the kit then yes it would be suitable if the original knob is not available.

Answer this question

Is it suitable for push ignition?

By vince T - falkirk - 08 February 2014
  • Chris from eSpares
    Chris at eSpares says...

    We think this should be suitable however it may be necessary to 'pack' the shaft chamber to ensure the knob does not slide down to far without pushing the control shaft.

Answer this question
By Mike - UK - 08 February 2014
  • Chris from eSpares
    Chris at eSpares says...

    The control knob 'bar' has an indicating mark at one end to identify its rotational position.

Answer this question