Oven Energy Regulator EGO 50.57071.010 for AKG218/BR/02 (853521815040) Stock Number: ES1592118
High quality replacement spare part for use with select models of cookers
My oven heats up ok but if I reduce the temperature until the light goes out, as it clicks for the light to go out it throws the trip switch in the fuse board. Is this likely to be the issue? 1 Answer
-
Chris at eSpares says...
It is possible for the regulator to cause this problem but it is more likely generally to be the element.
My FCEM9 as above. Could it be the regulator as the elements seem fine!
-
Parminder at eSpares says...
It may be the element, thermostat or electrical cable failure causing the problem. However please view our advice centre page which will give you more information, http://www.espares.co.uk/advice/1/2145 The model in this video may be different to yours, however the process should be similar for other makes and models.
Hi When setting bottom oven temp,it occasionally during cooking goes back to 160 and has to be re-set 1 Answer
MOD AKZ161/WH/01
-
Chris at eSpares says...
Check the power connections at the wall and at the terminal block on the back. if these are not loose or burning suspect the module.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
My cooker element does not heat up and the control panel does not light up. The grill works fine 1 Answer
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven: http://www.espares.co.uk/advice/1/2145
When grill is turned on only part of the element warms slightly then no more. Have replaced the element and switch gear 1 Answer
Diplomat Select AHY4420 Ser. no. 02296719
-
Chris at eSpares says...
The grill is controlled by a regulator and this part is likely to resolve your problem.
-
Chris at eSpares says...
If your display changes when you set it and then goes back to a different figure this may be to display the 'real' oven temperature as opposed to 'the requested temperature'. If the oven is not reaching the selected temperature and you are not using it on the 'fan' settings check all the elements are ok ie Upper grill and base oven element.
the element checks out resistance ok at 23 ohms
-
Chris at eSpares says...
On some ovens the top oven thermostat is still connected during grilling and will cause this problem. Ensure the air flow around the grill pan is as good as possible with the door wide open. If the power cuts off for over a minute the problem may be the safety thermostat inside the back at the top of the oven.
Will this part fit my appliance?
Check Now