Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Universal 4-Sided Oven Door Seal Kit - 2m (For Square Corners) Stock Number: ES131929

Cut to size door seal suitable for select sized ovens

Product Q&A

Ask a Question

because i need oven side door seal? (cannon winchester)

By mostsplendid - bristol - 29 September 2009
  • oven door seal ,2 fixings each corner. also 1 off white oven control knob for Cannon 'Winchester gas cooker oven. By teaern - Tamworth - 02 March 2010
  • My oven is a modern one and it fitted perfectly By joym - Manchester - 28 October 2009
  • i bought it for the oven side but on other models maybe fited to the door By timothy03 - Grimsby - 19 October 2009
Answer this question
By Anonymous - cornwall - 22 April 2009
  • No adhesives just clips By DOUGLA5 - Leicestershire - 22 January 2010
  • See if the seal is anchored at each corner. If so the fixing is probably mechanical and not adhesive. By Anonymous - Hereford - 23 April 2009
Answer this question
By Kit Johnson - Southampton - 26 February 2018
  • Chris from eSpares
    Chris at eSpares says...

    The overal length of the seal is 200cm.

Answer this question
By mw - London - 15 December 2017
  • Chris from eSpares
    Chris at eSpares says...

    Please see the video attached to the part.

Answer this question
By j wilks - cwmbran - 09 May 2016
  • Parminder from eSpares
    Parminder at eSpares says...

    This universal door seal is designed to fit most modern ovens that have a four sided seal with square corners and one hole in each corner. Please see our advice centre for more information: http://www.espares.co.uk/advice/1/1338/

Answer this question

The replacement seal is for the small oven. Replacement for exact part not found. Is this comparable?

By Rosemary Luffrum - Hayling Island, Hampshire - 12 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    This seal can be fitted on most ovens as a replacement so is likely to fit but we do not have information on your model. If you would like us to try and order the original seal please raise a part enquiry from the link Help Me Find The Part I Need below.

Answer this question
By meir - - 28 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    Check the total needed is less than 2 metres, if longer use two kits.

Answer this question
By Roy Piddington - Warwickshire - 27 October 2015
  • Chris from eSpares
    Chris at eSpares says...

    To source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

I am considering purchasing this for an old oven, but I would like to know the dimensions to ensure that the door will close.

By Dean - London - 01 January 2015
  • Chris from eSpares
    Chris at eSpares says...

    Unfortunately we are unable to provide the dimensions of this part. The parts listed on our website are all model and serial number dependant (apart from universal parts). In order for us to locate the correct spares for your appliance we would need the model information requested. Without this we cannot guarantee that the part ordered will be the correct one for your appliance. If unsuitable return subject to our policy listed at: http://www.espares.co.uk/returns

Answer this question

Model number has disappeared. It is approx 20 cms on either side with the corners about 2 to 3 cms. This seal is kept in place by tiny spring clips

By Anonymous - Warrington - 01 November 2014
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question