Over 4 million customers served
UK based customer service team
Dishwasher NTC Sensor Stock Number: ES731792
Genuine spare part for select Bosch, Neff and Siemens dishwashers
Manufactured by Bosch
(This part fits select models)
Will this part fit my Appliance?
Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number? Here's how
Check this part fits your appliance
2. Enter your model number
Dishwasher NTC Sensor
If your dishwasher isn't heating up to the correct temperature it could be time to replace the thermostat. The function of the thermostat is to regulate the temperature to the correct levels again, helping to ensure your dishes come out as clean as they usually do.
Genuine spare part for select Bosch, Neff and Siemens dishwashers.
Please check the list of appliances to make sure this NTC sensor will fit your dishwasher.
-
Southeast
-
MALTA
-
Carlisle
Ask a Question
9 Questions and 7 Answers
Having problems with Bosch Exxcel SGS45E68GB/64 dishwasher - it starts the programs ok (and heats water so I know the heater and relays are fine) and runs for a period of time but towards the drying cycle the washer is constantly emptying and refilling - never actually dries the dishes. I've measured the resistance on the NTC (165281) and is is open (infinity). The high limit side of the unit reads 0.3 ohms - does this suggest that the NTC is faulty ? Would it give the symptoms I'm seeing.
-
eSpares Staff at eSpares says...
It is unlikely the NTC but you will need to check the float in the bottom and if it has activated check for a leak but if not test the flow meter and the impellor jug.
Dishwasher switch’s on but turns off after about five mins we let it cool down then lights back on buttons then we can start again 1 Answer
Could it be thermostat
-
eSpares Staff at eSpares says...
You will need to determine what component has failed, we have a video to help www.youtube.com/watch?v=yL6A7I_rC2o&t just copy and paste into your browser.
Resistance of heater OK
-
eSpares Staff at eSpares says...
If the heater has tested ok then you would need to test the NTC to determine if it has failed.
The control lights no longer illuminate but the DW has power. The impeller spins briefly and splashes water around and I cannot find any trace of debris in the well. Any ideas please?
-
Dean at eSpares says...
Please see our advice centre for more help www.espares.co.uk/advice/symptom/my-dishwasher-is-not-working just copy and paste the link into your browser.
Dishwasher gets three quarters way through its cycle then stops and knocks all electric off in the house. Dishwasher gets really hot. Same fault on whichever program I set it on. Works perfectly until it gets to the drying stage 1 Answer
Will the problem be the Thermostat?
-
Chris at eSpares says...
The problem is likely to be the water heater not the thermostat.
Will this part fit my appliance?
Check Now
Just what I needed 30 September 2017
Easy to locate on the site & arrived in jig time. Fitting to a Bosch Exxcel dishwasher involved a pretty major dismantling of the machine, but it all came together in the end and solved the "non-drying" problem. Not simple, but did the job.