Candy Washing Machine Door Interlock for GO612-37S Stock Number: ES670687
Genuine spare part for select Candy, Hoover, Otsein, and Zerowatt washing machines
Manufactured by Hoover
(This part fits select Candy models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Door Interlock
If your washing machine is not starting with the relevant lights lit on the fascia panel, then it could be because the door interlock has failed. Not only does this lock ensure the door is firmly closed, but it also works as a safety feature, by preventing the washer from running if the door is not securely shut.
With help from eSpares, you can soon be back to a safe and fully working washing machine again, so the pile of laundry does not start to stack up for you!
Specification:
- Type: DM series DM053
Genuine spare part for select Candy, Hoover, Otsein, and Zerowatt washing machines.
Prior to purchase, please see the list of appliances to ensure that this is the right part for you.
12 Questions and 11 Answers
I bought Hoover Washing Machine Door Interlock for HPB145-80 from espares & followed the video, but after fitting, the washer door won’t close. It doesn’t click into place, whereas it did before. I’ve gone wrong somewhere, any ideas please? 1 Answer
-
eSpares Staff at eSpares says...
Check the position of the door lock, make sure the door does not need adjusting as the catch needs to go straight into the lock otherwise it does not connect.
How do you remove the door interlock on a hoover dxoc 68c3/1 80? New part looks like ES670687 1 Answer
No click when pressing start, door does not stay closed but very faint click after time delay after switching off so am assuming it is the door interlock.
-
eSpares Staff at eSpares says...
The door lock is held in place by 2 pips that have to be released by pushing them with a screwdriver.
Not sure if it is the door innerlock when close door it flashes saying door is locked select cycle and light s flash the door shows a lock symbol but it is not locked sometimes if i push hard onto door it will start 1 Answer
Just need advice if it is the innerdoor lock
-
Dean at eSpares says...
We believe it is likely to be the door lock.
Hi I ave a candy godf800 washing machine with error 01 coming up. Is it the door interlock that is the problem? If so will any of the ones on your site be compatible with it to replace? Thanks in advance.
-
Chris at eSpares says...
If the door opens and closes correctly replacing the lock may resolve the E01 problem. The part is listed as Stock Number ES670687
ok,but on the HPE236 there are no retaining screws and no obvious method of removal of the door interlock 1 Answer
Thanks for your original answer
-
Chris at eSpares says...
Remove the door seal from the front and press the 'pips' that push through the front panel either side of he lock hole and slide the lock hole frame away from the door. It should then hinge/lift away. To fit the new lock hook the hole frame into the front panel and hinge/slide it into position until the 'pips' lock it in place.
Will this part fit my appliance?
Check Now
