Pressure Washer Water Inlet Connection Stock Number: ES664509
Genuine spare part manufactured for the Karcher 'KB302' pressure washer
Manufactured by Karcher
(This part fits select models)
Pressure Washer Water Inlet Connection
Has the water inlet connection on your washer become faulty? If that's the case don't panic as eSpares may have the part that you require. We could soon get your pressure back into working order.
Please Note: Check the image below, if the part you need is positioned underneath the control head, then this is the correct part. If it is positioned to the left or above the control head, then this is not correct part you require.
Genuine spare part manufactured for the Karcher 'KB302' pressure washer
Please check the model fit list to ensure compatibility with your appliance.
Please note: This part does not include the O-ring or valve.
2 Questions and 2 Answers
Based on the video I was expecting a replacement o-ring and valve to come with this item but there wasn't any. Should I have received these too?
-
Rory at eSpares says...
Hi Marple, sorry for any confusion caused; the o-ring and valve don't come with this inlet connection. I understand that the video makes that slightly ambiguous, so I've added a note to it above. To find the o-ring you're after for the KB302, look here: http://www.espares.co.uk/parts/pressure-washers/karcher/kb302/p/1315/877/0/507567?k=gasket Additionally, you can find all the valves listed for the KB302 here: http://www.espares.co.uk/parts/pressure-washers/karcher/kb302/p/1315/877/0/507567?k=valve Thanks, and once again sorry for any confusion.
I have a split inlet elbow connection for my Karcher B403 modle no: 033640 can you advise me on the correct replacement part 1 Answer
This elbow connection is made up in two parts the part into the machine is fine but the part to the hose is cracked. The one i have appears to be different to that of your web site. It has a female connection to two other elbow and a male connection to the hose. Approx 9.5cm long
-
eSparesMalindi at eSpares says...
In order to confirm the correct part, you will need to find the model and chassis numbers from your appliance. This can be found at: http://www.espares.co.uk/findingmodelnumbers.aspx
